PartsTable
Technical Data Sheet
Download PDF

211056533 — PIN,STRAIGHT,HEADED

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

211056533: PIN,STRAIGHT,HEADED.

The PIN,STRAIGHT,HEADED is a the manufacturer industrial component. Key specifications include HEIGHT: 0.710 INCHES MINIMUM AND 0.710 INCHES MINIMUM AND 0.730 INCHES MAXIMUM0.730 INCHES MAXIMUM IN, DIAMETER: 0.385 INCHES MINIMUM AND 0.385 INCHES MINIMUM AND 0.390 INCHES MAXIMUM0.390 INCHES MAXIMUM IN, HEAD STYLE: FLAT FILLISTERFLAT FILLISTER, CHAMFER LENGTH: 0.060 INCHES NOMINAL0.060 INCHES NOMINAL IN, STYLE DESIGNATOR: STRAIGHTSTRAIGHT, PIN CHAMFER ANGLE: 25.0 DEGREES MINIMUM AND 25.0 DEGREES MINIMUM AND 35.0 DEGREES MAXIMUM35.0 DEGREES MAXIMUM. This part is cataloged in the U.S.

Government catalog under NSN 5315-01-355-4936, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
211056533
NSN: 5315-01-355-4936
FSC: 5315 — Nails, Machine Keys, and Pins
CAGE: 53711 — NAVAL SEA SYSTEMS COMMAND (USA)
SPECIFICATIONS
HEIGHT0.710 INCHES MINIMUM AND 0.710 INCHES MINIMUM AND 0.730 INCHES MAXIMUM0.730 INCHES MAXIMUM IN
DIAMETER0.385 INCHES MINIMUM AND 0.385 INCHES MINIMUM AND 0.390 INCHES MAXIMUM0.390 INCHES MAXIMUM IN
HEAD STYLEFLAT FILLISTERFLAT FILLISTER
CHAMFER LENGTH0.060 INCHES NOMINAL0.060 INCHES NOMINAL IN
STYLE DESIGNATORSTRAIGHTSTRAIGHT
PIN CHAMFER ANGLE25.0 DEGREES MINIMUM AND 25.0 DEGREES MINIMUM AND 35.0 DEGREES MAXIMUM35.0 DEGREES MAXIMUM
PIN HEAD DIAMETER0.4876 INCHES MINIMUM AND 0.4876 INCHES MINIMUM AND 0.4985 INCHES MAXIMUM0.4985 INCHES MAXIMUM IN
UNDER HEAD LENGTH2.980 INCHES NOMINAL2.980 INCHES NOMINAL IN
FIRST HOLE DIAMETER0.120 INCHES MINIMUM AND 0.120 INCHES MINIMUM AND 0.125 INCHES MAXIMUM0.125 INCHES MAXIMUM IN
HOLE ARRANGEMENT STYLEDRILLED THRU HEADDRILLED THRU HEAD
DISTANCE FROM CENTERLINE OF HOLE TO END OF PIN0.360 INCHES NOMINAL0.360 INCHES NOMINAL IN
NSN5315-01-355-4936
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 211056533 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CHAMFER LENGTH: 0.060 INCHES NOMINAL0.060 INCHES NOMINAL IN
•
HOLE ARRANGEMENT STYLE: DRILLED THRU HEADDRILLED THRU HEAD
•
UNDER HEAD LENGTH: 2.980 INCHES NOMINAL2.980 INCHES NOMINAL IN
•
PIN CHAMFER ANGLE: 25.0 DEGREES MINIMUM AND 25.0 DEGREES MINIMUM AND 35.0 DEGREES MAXIMUM35.0 DEGREES MAXIMUM
•
FIRST HOLE DIAMETER: 0.120 INCHES MINIMUM AND 0.120 INCHES MINIMUM AND 0.125 INCHES MAXIMUM0.125 INCHES MAXIMUM IN
•
STYLE DESIGNATOR: STRAIGHTSTRAIGHT
•
PIN HEAD DIAMETER: 0.4876 INCHES MINIMUM AND 0.4876 INCHES MINIMUM AND 0.4985 INCHES MAXIMUM0.4985 INCHES MAXIMUM IN
•
DIAMETER: 0.385 INCHES MINIMUM AND 0.385 INCHES MINIMUM AND 0.390 INCHES MAXIMUM0.390 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS
CHAMFER LENGTH0.060 INCHES NOMINAL0.060 INCHES NOMINAL IN
HOLE ARRANGEMENT STYLEDRILLED THRU HEADDRILLED THRU HEAD
UNDER HEAD LENGTH2.980 INCHES NOMINAL2.980 INCHES NOMINAL IN
PIN CHAMFER ANGLE25.0 DEGREES MINIMUM AND 25.0 DEGREES MINIMUM AND 35.0 DEGREES MAXIMUM35.0 DEGREES MAXIMUM
FIRST HOLE DIAMETER0.120 INCHES MINIMUM AND 0.120 INCHES MINIMUM AND 0.125 INCHES MAXIMUM0.125 INCHES MAXIMUM IN
STYLE DESIGNATORSTRAIGHTSTRAIGHT
PIN HEAD DIAMETER0.4876 INCHES MINIMUM AND 0.4876 INCHES MINIMUM AND 0.4985 INCHES MAXIMUM0.4985 INCHES MAXIMUM IN
DIAMETER0.385 INCHES MINIMUM AND 0.385 INCHES MINIMUM AND 0.390 INCHES MAXIMUM0.390 INCHES MAXIMUM IN
HEAD STYLEFLAT FILLISTERFLAT FILLISTER
HEIGHT0.710 INCHES MINIMUM AND 0.710 INCHES MINIMUM AND 0.730 INCHES MAXIMUM0.730 INCHES MAXIMUM IN
SUBSTITUTES & CROSS-REFERENCES 2
801-6308778 FIND 21Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
DF330635 FIND 21Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 211056533?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 211056533?
211056533 is a PIN,STRAIGHT,HEADED.
What parts can replace 211056533?
There are 2 known substitutes for 211056533: 801-6308778 FIND 21, DF330635 FIND 21. Substitute compatibility should be verified for your specific system.
What is the NSN for 211056533?
211056533 is cataloged in the U.S. Government catalog under NSN 5315-01-355-4936. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 211056533

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.