PartsTable
Technical Data Sheet
Download PDF

211044749 — PIN,STRAIGHT,HEADLESS

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

211044749: PIN,STRAIGHT,HEADLESS.

The PIN,STRAIGHT,HEADLESS is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, first_end_style: RADIUS, second_end_style: CHAMFERED, pin_overall_length: 1.500 INCHES NOMINAL IN, pin_overall_diameter: 0.7200 INCHES NOMINAL IN, second_end_taper_angle: 45.0 DEGREES NOMINAL. This part is cataloged in the U.S.

Government catalog under NSN 5315-01-416-5471, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
211044749
NSN: 5315-01-416-5471
FSC: 5315 — Nails, Machine Keys, and Pins
CAGE: 53711 — NAVAL SEA SYSTEMS COMMAND (USA)
SPECIFICATIONS
materialSTEEL OVERALL
first_end_styleRADIUS
second_end_styleCHAMFERED
pin_overall_length1.500 INCHES NOMINAL IN
pin_overall_diameter0.7200 INCHES NOMINAL IN
second_end_taper_angle45.0 DEGREES NOMINAL
first_end_corner_radius0.080 INCHES NOMINAL IN
second_end_taper_length0.040 INCHES NOMINAL IN
second_end_relationship_with_first_endNOT IDENTICAL
NSN5315-01-416-5471
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 211044749 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SECOND END TAPER ANGLE: 45.0 DEGREES NOMINAL
•
FIRST END STYLE: RADIUS
•
SECOND END TAPER LENGTH: 0.040 INCHES NOMINAL IN
•
PIN OVERALL DIAMETER: 0.7200 INCHES NOMINAL IN
•
PIN OVERALL LENGTH: 1.500 INCHES NOMINAL IN
•
SECOND END RELATIONSHIP WITH FIRST END: NOT IDENTICAL
•
SECOND END STYLE: CHAMFERED
•
MATERIAL: STEEL OVERALL
TECHNICAL CHARACTERISTICS
SECOND END TAPER ANGLE45.0 DEGREES NOMINAL
FIRST END STYLERADIUS
SECOND END TAPER LENGTH0.040 INCHES NOMINAL IN
PIN OVERALL DIAMETER0.7200 INCHES NOMINAL IN
PIN OVERALL LENGTH1.500 INCHES NOMINAL IN
SECOND END RELATIONSHIP WITH FIRST ENDNOT IDENTICAL
SECOND END STYLECHAMFERED
MATERIALSTEEL OVERALL
FIRST END CORNER RADIUS0.080 INCHES NOMINAL IN
OTHER ITEMS IN FSC 5315 — Nails, Machine Keys, and Pins
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5315-00-000-1037 5315-00-000-1067 5315-00-000-1245 5315-00-000-1372 5315-00-000-1412 5315-00-001-1571 5315-00-001-1572 5315-00-001-1602
SUBSTITUTES & CROSS-REFERENCES 2
752-6406844-30Reference document
Same NSN cross-reference
Reference document — Secondary reference
DF1706-431 NO.30Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 211044749?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 211044749?
211044749 is a PIN,STRAIGHT,HEADLESS.
What parts can replace 211044749?
There are 2 known substitutes for 211044749: 752-6406844-30, DF1706-431 NO.30. Substitute compatibility should be verified for your specific system.
What is the NSN for 211044749?
211044749 is cataloged in the U.S. Government catalog under NSN 5315-01-416-5471. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 211044749