PartsTable
Technical Data Sheet
Download PDF

211044653 — SEAL,PLAIN ENCASED

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

211044653: SEAL,PLAIN ENCASED.

The SEAL,PLAIN ENCASED is a the manufacturer industrial component. Key specifications include material: RUBBER SYNTHETIC SEALING ELEMENT A, case_style: SQUARE, seal_width: 0.406 INCHES NOMINAL IN, special_features: CRES COIL SPRING, housing_bore_diameter: 1.370 INCHES NOMINAL IN, sealing_element_style: VERTICAL-ANGULAR. This part is cataloged in the U.S.

Government catalog under NSN 5330-00-079-6481, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
211044653
NSN: 5330-00-079-6481
FSC: 5330 — Packing and Gasket Materials
CAGE: D9182 — ZF INDUSTRIEANTRIEBE WITTEN GMBH (DEU)
SPECIFICATIONS
materialRUBBER SYNTHETIC SEALING ELEMENT A
case_styleSQUARE
seal_width0.406 INCHES NOMINAL IN
special_featuresCRES COIL SPRING
housing_bore_diameter1.370 INCHES NOMINAL IN
sealing_element_styleVERTICAL-ANGULAR
accommodated_shaft_diameter0.750 INCHES NOMINAL IN
accommodated_shaft_maximum_rated_speed2000 FEET PER MINUTE FT
NSN5330-00-079-6481
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 211044653 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SEAL WIDTH: 0.406 INCHES NOMINAL IN
•
SEALING ELEMENT STYLE: VERTICAL-ANGULAR
•
HOUSING BORE DIAMETER: 1.370 INCHES NOMINAL IN
•
ACCOMMODATED SHAFT MAXIMUM RATED SPEED: 2000 FEET PER MINUTE FT
•
CASE STYLE: SQUARE
•
ACCOMMODATED SHAFT DIAMETER: 0.750 INCHES NOMINAL IN
•
MATERIAL: STEEL CORROSION RESISTING CASE
TECHNICAL CHARACTERISTICS
SEAL WIDTH0.406 INCHES NOMINAL IN
SEALING ELEMENT STYLEVERTICAL-ANGULAR
HOUSING BORE DIAMETER1.370 INCHES NOMINAL IN
ACCOMMODATED SHAFT MAXIMUM RATED SPEED2000 FEET PER MINUTE FT
CASE STYLESQUARE
SPECIAL FEATURESCRES COIL SPRING
ACCOMMODATED SHAFT DIAMETER0.750 INCHES NOMINAL IN
MATERIALSTEEL CORROSION RESISTING CASE
MATERIALRUBBER SYNTHETIC SEALING ELEMENT A
MATERIALRUBBER SYNTHETIC SEALING ELEMENT B
SUBSTITUTES & CROSS-REFERENCES 3
5330PL0915446Reference document
Same NSN cross-reference
Reference document — Informative reference only
1549650PC8Reference document
Same NSN cross-reference
Reference document — Vendor item drawing reference
1549650-8Reference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 211044653?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 211044653?
211044653 is a SEAL,PLAIN ENCASED.
What parts can replace 211044653?
There are 3 known substitutes for 211044653: 5330PL0915446, 1549650PC8, 1549650-8. Substitute compatibility should be verified for your specific system.
What is the NSN for 211044653?
211044653 is cataloged in the U.S. Government catalog under NSN 5330-00-079-6481. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 211044653

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.