PartsTable
Technical Data Sheet
Download PDF

211039962 — SCREW,CAP,SOCKET HEAD

✓ Government record, cited
— · BOLT SCREW
PRODUCT OVERVIEW

211039962: SCREW,CAP,SOCKET HEAD.

The SCREW,CAP,SOCKET HEAD is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, head_style: FLAT CHAMFER, head_height: 0.616 INCHES MINIMUM AND 0.625 INCHES MAXIMUM IN, thread_class: 3A A, head_diameter: 0.921 INCHES MINIMUM AND 0.938 INCHES MAXIMUM IN, thread_length: 4.068 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5305-01-353-2024, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
211039962
NSN: 5305-01-353-2024
FSC: 5305 — Screws
CAGE: 53711 — NAVAL SEA SYSTEMS COMMAND (USA)
SPECIFICATIONS
materialSTEEL OVERALL
head_styleFLAT CHAMFER
head_height0.616 INCHES MINIMUM AND 0.625 INCHES MAXIMUM IN
thread_class3A A
head_diameter0.921 INCHES MINIMUM AND 0.938 INCHES MAXIMUM IN
thread_length4.068 INCHES NOMINAL IN
fastener_length4.250 INCHES NOMINAL IN
thread_directionRIGHT-HAND
width_across_flats0.500 INCHES NOMINAL IN
internal_drive_styleHEXAGON
end_item_identificationARMORED MULTI-PURPOSE VEHICLE (AMPV)
nominal_thread_diameter0.625 INCHES IN
NSN5305-01-353-2024
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: 211039962 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
WIDTH ACROSS FLATS: 0.500 INCHES NOMINAL IN
•
HEAD HEIGHT: 0.616 INCHES MINIMUM AND 0.625 INCHES MAXIMUM IN
•
FASTENER LENGTH: 4.250 INCHES NOMINAL IN
•
THREAD LENGTH: 4.068 INCHES NOMINAL IN
•
NOMINAL THREAD DIAMETER: 0.625 INCHES IN
•
HEAD STYLE: FLAT CHAMFER
•
THREAD DIRECTION: RIGHT-HAND
•
INTERNAL DRIVE STYLE: HEXAGON
TECHNICAL CHARACTERISTICS
WIDTH ACROSS FLATS0.500 INCHES NOMINAL IN
HEAD HEIGHT0.616 INCHES MINIMUM AND 0.625 INCHES MAXIMUM IN
FASTENER LENGTH4.250 INCHES NOMINAL IN
THREAD LENGTH4.068 INCHES NOMINAL IN
NOMINAL THREAD DIAMETER0.625 INCHES IN
HEAD STYLEFLAT CHAMFER
THREAD DIRECTIONRIGHT-HAND
INTERNAL DRIVE STYLEHEXAGON
THREAD CLASS3A A
END ITEM IDENTIFICATIONARMORED MULTI-PURPOSE VEHICLE (AMPV)
SUBSTITUTES & CROSS-REFERENCES 3
ANSI B18.3Reference document
Same NSN cross-reference
Reference document — Design control — primary reference
MIL-DTL-1222Reference document
Same NSN cross-reference
Reference document — Identification reference
MIL-S-1222Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 211039962?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 211039962?
211039962 is a SCREW,CAP,SOCKET HEAD.
What parts can replace 211039962?
There are 3 known substitutes for 211039962: ANSI B18.3, MIL-DTL-1222, MIL-S-1222. Substitute compatibility should be verified for your specific system.
What is the NSN for 211039962?
211039962 is cataloged in the U.S. Government catalog under NSN 5305-01-353-2024. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 211039962

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.