PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 2110-7/16
2110-7/16 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The 2110-7/16 is a the manufacturer industrial component. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-286-7536, indicating validated use in U.S. government and defense logistics supply chains.

Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
2110-7/16
NSN: 5330-00-286-7536
FSC: 5330
CAGE: 58587 — VENTURA MACHINING CENTER
SPECIFICATIONS
Part Number2110-7/16
NSN5330-00-286-7536
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 2110-7/16 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
RETAINER THICKNESS: 0.0725 INCHES MINIMUM AND 0.0775 INCHES MAXIMUM IN
•
PACKING INSIDE DIAMETER: 0.467 INCHES MINIMUM AND 0.472 INCHES MAXIMUM IN
•
MATERIAL: RUBBER SYNTHETIC PACKING
•
SURFACE TREATMENT: CADMIUM RETAINER
•
OUTSIDE DIAMETER: 0.762 INCHES MINIMUM AND 0.770 INCHES MAXIMUM IN
•
CONSTRUCTION: ONE-PIECE
TECHNICAL CHARACTERISTICS (FLIS)
RETAINER THICKNESS0.0725 INCHES MINIMUM AND 0.0775 INCHES MAXIMUM IN
PACKING INSIDE DIAMETER0.467 INCHES MINIMUM AND 0.472 INCHES MAXIMUM IN
MATERIALRUBBER SYNTHETIC PACKING
MATERIALSTEEL RETAINER
SURFACE TREATMENTCADMIUM RETAINER
OUTSIDE DIAMETER0.762 INCHES MINIMUM AND 0.770 INCHES MAXIMUM IN
CONSTRUCTIONONE-PIECE
VERIFIED SUBSTITUTES & CROSS-REFERENCES 15
1302Interchangeable
interchangeable cross-reference
interchangeable
310-RTInterchangeable
interchangeable cross-reference
interchangeable
940 7/16Interchangeable
interchangeable cross-reference
interchangeable
110716Interchangeable
interchangeable cross-reference
interchangeable
AM2415APXInterchangeable
interchangeable cross-reference
interchangeable
1100716000Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 2110-7/16?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 2110-7/16?
2110-7/16 is a 2110-7/16.
What parts can replace 2110-7/16?
There are 15 known substitutes for 2110-7/16: 1302, 310-RT, 940 7/16 and 12 more. Substitute compatibility should be verified for your specific system.
Is 2110-7/16 still available?
2110-7/16 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 2110-7/16

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026