PartsTable / COMPONENT / 2110-0500
2110-0500
✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW
The SCREW,MACHINE is a the manufacturer industrial component. Key specifications include special_features: GEMINI NEEDLELESS ADMINISTRATION SET, VENTED/UNVENTED WITH 2 VERSASAFE INJECTION SITES, 20 DROP, part_name_assigned_by_controlling_agency: ADMINISTRATION SET INFUSION PUMP GEMINI NEEDLELESS VENTED/UNVENT 20S. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-641-2291, indicating validated use in U.S.
government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.
WHERE IT FITS
2110-0500
NSN: 5330-00-641-2291 FSC: 5330 CAGE: D9182 — ZF INDUSTRIEANTRIEBE WITTEN GMBH (DEU)
SPECIFICATIONS
special_features GEMINI NEEDLELESS ADMINISTRATION SET, VENTED/UNVENTED WITH 2 VERSASAFE INJECTION SITES, 20 DROP part_name_assigned_by_controlling_agency ADMINISTRATION SET INFUSION PUMP GEMINI NEEDLELESS VENTED/UNVENT 20S NSN 5330-00-641-2291
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION
ID: —
CROSS-SECTION
CS: —
SPECIFICATION
Material: —
Durometer: —
Temp: —
PN: 2110-0500
MFR: OEM
⚠ VERIFY BEFORE ORDERING
Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade.
Chemical incompatibility causes swelling, brittleness, or rapid degradation
✓ BROKER TIP
Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure.
Standard durometer is 70A — verify if application requires different hardness
PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
• MATERIAL: RUBBER SYNTHETIC PACKING
• OUTSIDE DIAMETER: 0.875 INCHES NOMINAL IN
• PACKING INSIDE DIAMETER: 0.540 INCHES NOMINAL IN
• PACKING RING CROSS-SECTIONAL DIAMETER: 0.061 INCHES NOMINAL IN
• RETAINER THICKNESS: 0.075 INCHES NOMINAL IN
• SURFACE TREATMENT: CADMIUM RETAINER
TECHNICAL CHARACTERISTICS (FLIS)
CONSTRUCTION ONE-PIECE MATERIAL RUBBER SYNTHETIC PACKING OUTSIDE DIAMETER 0.875 INCHES NOMINAL IN MATERIAL STEEL RETAINER PACKING INSIDE DIAMETER 0.540 INCHES NOMINAL IN PACKING RING CROSS-SECTIONAL DIAMETER 0.061 INCHES NOMINAL IN RETAINER THICKNESS 0.075 INCHES NOMINAL IN SURFACE TREATMENT CADMIUM RETAINER
VERIFIED SUBSTITUTES & CROSS-REFERENCES 21
212348 Interchangeable interchangeable cross-reference
interchangeable
23753 Interchangeable interchangeable cross-reference
interchangeable
77819H Interchangeable interchangeable cross-reference
interchangeable
43397 Interchangeable interchangeable cross-reference
interchangeable
SDD8003PC2 Interchangeable interchangeable cross-reference
interchangeable
PP023AA0000 Interchangeable interchangeable cross-reference
interchangeable
LIFECYCLE
Status CANCELLED
Availability —
RoHS Compliant EAR99 Not HAZMAT
Ready to buy 2110-0500?
Compare prices from verified sellers on eBay
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 2110-0500?
2110-0500 is a SCREW,MACHINE.
What parts can replace 2110-0500?
There are 21 known substitutes for 2110-0500: 212348, 23753, 77819H and 18 more. Substitute compatibility should be verified for your specific system.
Is 2110-0500 still available?
2110-0500 is currently cancelled.
Request a Quote — 2110-0500