PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 211-319-319-6-25
211-319-319-6-25 ✓ Verified by PartsTable
— · PIPE SECTION
WHAT YOU NEED TO KNOW
Schedule = wall thickness, NOT diameter Nominal pipe size != actual OD
Sch 40 and Sch 80 same OD, different wall
PRODUCT OVERVIEW

The HOSE ASSEMBLY,NONMETALLIC is a the manufacturer industrial component. Key specifications include seat_angle: 37.0 DEGREES FIRST END, temp_rating: -40.0 FAHRENHEIT AND 275.0 FAHRENHEIT SINGLE RESPONSE DEGF, thread_class: 2B FIRST END, exterior_color: NATURAL, connection_type: THREADED INTERNAL TUBE FIRST END, inside_diameter: 0.312 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 4720-00-410-9421, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
211-319-319-6-25
NSN: 4720-00-410-9421
FSC: 4720
CAGE: 98441 — PARKER HANNIFIN CORP DBA PNEUTRONICS DIV STRATOFLEX PRODUCTS DIVISION (USA)
SPECIFICATIONS
seat_angle37.0 DEGREES FIRST END
temp_rating-40.0 FAHRENHEIT AND 275.0 FAHRENHEIT SINGLE RESPONSE DEGF
thread_class2B FIRST END
exterior_colorNATURAL
connection_typeTHREADED INTERNAL TUBE FIRST END
inside_diameter0.312 INCHES NOMINAL IN
connection_styleSWIVEL NUT FLARE FIRST END
outside_diameter0.670 INCHES NOMINAL IN
thread_directionRIGHT-HAND FIRST END
operating_pressure2000.0 POUNDS PER SQUARE INCH (PSI) MAXIMUM LOCATION NOT OTHERWISE SPECIFIED LBS
burst_test_pressure9000.0 POUNDS PER SQUARE INCH LBS
nominal_thread_size0.562 INCHES FIRST END IN
NSN4720-00-410-9421
COMPONENT DIAGRAM
PIPE SECTION — SCHEDULE = WALL THICKNESS WALL: — OD: — LENGTH: — — — PN: 211-319-319-6-25 · OEM ⚠ VERIFY BEFORE ORDERING Schedule = wall thickness, NOT pipe diameter. Sch 40 and Sch 80 have the same OD but different wall thickness. Nominal pipe size ≠ actual OD — a 1" pipe is actually 1.315" OD ✓ BROKER TIP Sch 40 = standard wall, Sch 80 = heavy wall (higher pressure), Sch 160 = extra heavy. Seamless pipe is required for high-pressure applications — welded pipe has lower ratings PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
INSIDE SURFACE CONDITION: SMOOTH
•
MEASURING METHOD AND LENGTH: 25.000 INCHES NOMINAL WORKING IN
•
BURST TEST PRESSURE: 9000.0 POUNDS PER SQUARE INCH LBS
•
SEAT ANGLE: 37.0 DEGREES FIRST END
•
NOMINAL THREAD SIZE: 0.562 INCHES FIRST END IN
•
THREAD SERIES DESIGNATOR: UNF FIRST END
•
THREAD CLASS: 2B FIRST END
•
OUTSIDE DIAMETER: 0.670 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
INSIDE SURFACE CONDITIONSMOOTH
MEASURING METHOD AND LENGTH25.000 INCHES NOMINAL WORKING IN
BURST TEST PRESSURE9000.0 POUNDS PER SQUARE INCH LBS
SEAT ANGLE37.0 DEGREES FIRST END
NOMINAL THREAD SIZE0.562 INCHES FIRST END IN
THREAD SERIES DESIGNATORUNF FIRST END
THREAD CLASS2B FIRST END
OUTSIDE DIAMETER0.670 INCHES NOMINAL IN
CONNECTION STYLESWIVEL NUT FLARE FIRST END
LAYER COMPOSITION AND LOCATION2ND LAYER RUBBER IMPREGNATED BRAIDED FABRIC AND 1ST LAYER BRAIDED STEEL WIRE AND OUTER LAYER RUBBER IMPREGNATED BRAIDED FABRIC
VERIFIED SUBSTITUTES & CROSS-REFERENCES 6
589-444Interchangeable
interchangeable cross-reference
interchangeable
SG3524JInterchangeable
interchangeable cross-reference
interchangeable
3524CNInterchangeable
interchangeable cross-reference
interchangeable
5500-015Interchangeable
Same NIIN cross-reference
interchangeable
M2010606-6-6-6-25.0Interchangeable
Same NIIN cross-reference
interchangeable
211R6JS6JS6-25Interchangeable
Same NIIN cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 211-319-319-6-25?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 211-319-319-6-25?
211-319-319-6-25 is a HOSE ASSEMBLY,NONMETALLIC.
What parts can replace 211-319-319-6-25?
There are 6 known substitutes for 211-319-319-6-25: 589-444, SG3524J, 3524CN and 3 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 211-319-319-6-25?
211-319-319-6-25 is cataloged in the Federal Logistics Information System (FLIS) under NSN 4720-00-410-9421. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 211-319-319-6-25

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026