PartsTable
Technical Data Sheet
Download PDF

210SP — PIN,GROOVED,HEADLESS

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

210SP: PIN,GROOVED,HEADLESS.

The PIN,GROOVED,HEADLESS is a the manufacturer industrial component. Key specifications include diameter: 0.7755 INCHES MINIMUM AND 0.7760 INCHES MAXIMUM IN, material: STEEL OVERALL, overall_length: 1.0000 INCHES NOMINAL IN, undercut_width: 0.0740 INCHES MINIMUM AND 0.0840 INCHES MAXIMUM IN, first_end_style: CHAMFERED, undercut_radius: 0.037 INCHES MINIMUM AND 0.042 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5315-00-350-2998, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
210SP
NSN: 5315-00-350-2998
FSC: 5315 — Nails, Machine Keys, and Pins
CAGE: 72447 — DANA COMMERCIAL VEHICLE MANUFACTURING, LLC DBA DANA COMMERCIAL VEHICLE PRODUCTS (USA)
SPECIFICATIONS
diameter0.7755 INCHES MINIMUM AND 0.7760 INCHES MAXIMUM IN
materialSTEEL OVERALL
overall_length1.0000 INCHES NOMINAL IN
undercut_width0.0740 INCHES MINIMUM AND 0.0840 INCHES MAXIMUM IN
first_end_styleCHAMFERED
undercut_radius0.037 INCHES MINIMUM AND 0.042 INCHES MAXIMUM IN
effective_length0.875 INCHES NOMINAL IN
undercut_diameter0.6960 INCHES MINIMUM AND 0.7060 INCHES MAXIMUM IN
first_end_locationBOTH ENDS
first_end_taper_angle45.0 DEGREES NOMINAL
first_end_taper_length0.062 INCHES NOMINAL IN
second_end_relationship_with_first_endIDENTICAL
NSN5315-00-350-2998
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 210SP · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
UNDERCUT WIDTH: 0.0740 INCHES MINIMUM AND 0.0840 INCHES MAXIMUM IN
•
FIRST END TAPER LENGTH: 0.062 INCHES NOMINAL IN
•
UNDERCUT DIAMETER: 0.6960 INCHES MINIMUM AND 0.7060 INCHES MAXIMUM IN
•
FIRST END LOCATION: BOTH ENDS
•
FIRST END STYLE: CHAMFERED
•
DIAMETER: 0.7755 INCHES MINIMUM AND 0.7760 INCHES MAXIMUM IN
•
FIRST END TAPER ANGLE: 45.0 DEGREES NOMINAL
TECHNICAL CHARACTERISTICS
UNDERCUT WIDTH0.0740 INCHES MINIMUM AND 0.0840 INCHES MAXIMUM IN
FIRST END TAPER LENGTH0.062 INCHES NOMINAL IN
UNDERCUT DIAMETER0.6960 INCHES MINIMUM AND 0.7060 INCHES MAXIMUM IN
FIRST END LOCATIONBOTH ENDS
FIRST END STYLECHAMFERED
DIAMETER0.7755 INCHES MINIMUM AND 0.7760 INCHES MAXIMUM IN
OVERALL LENGTH1.0000 INCHES NOMINAL IN
FIRST END TAPER ANGLE45.0 DEGREES NOMINAL
SECOND END RELATIONSHIP WITH FIRST ENDIDENTICAL
EFFECTIVE LENGTH0.875 INCHES NOMINAL IN
OTHER ITEMS IN FSC 5315 — Nails, Machine Keys, and Pins
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5315-00-000-1037 5315-00-000-1067 5315-00-000-1245 5315-00-000-1372 5315-00-000-1412 5315-00-001-1571 5315-00-001-1572 5315-00-001-1602
SUBSTITUTES & CROSS-REFERENCES 1
382361Reference document
Same NSN cross-reference
Reference document — Design control — primary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
No demilitarization required
Ready to buy 210SP?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 210SP?
210SP is a PIN,GROOVED,HEADLESS.
What parts can replace 210SP?
There is 1 known substitute for 210SP: 382361. Substitute compatibility should be verified for your specific system.
What is the NSN for 210SP?
210SP is cataloged in the U.S. Government catalog under NSN 5315-00-350-2998. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 210SP