PartsTable
Technical Data Sheet
21095 ✓ Verified by PartsTable
Bestway · MRO · MRO_GENERAL
WHAT YOU NEED TO KNOW
SAS cables have specific lane counts: 4i (internal) or 4e (external) Cable length matters — too short won't reach, too long creates clutter
Verify connector type on BOTH ends — many SAS cables are asymmetric
PRODUCT OVERVIEW

- Soft and resistant woven acrylic to protect your hands from the cold<br>- Fully conductive on all fingers for optimal use<br>- Wind-proof cuff provides a perfect fit<br>- Ideal to control your smartphone, smartwatch or sportwatch when sporting outdoors This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5998-00-563-0607, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO MRO_GENERAL 21095
NSN: 5998-00-563-0607
FSC: 5998 — CIRCUIT CARD ASSEMBLY
CAGE: 00638 — TRIO LABORATORIES INC (USA)
SPECIFICATIONS
materialPLASTIC OVERALL
body_styleCYLINDRICAL BUSHING MOUNTED
case_styleSQUARE
scale_nameCABIN PRESSURE ALTITUDE
seal_width0.375 INCHES NOMINAL IN
body_length0.625 INCHES NOMINAL IN
shaft_styleROUND, SLOTTED
temp_rating-65.0 FAHRENHEIT AND 225.0 FAHRENHEIT DEGF
contact_typePIN
shaft_length0.875 INCHES NOMINAL IN
actuator_typeSINGLE SHAFT
body_diameter1.156 INCHES NOMINAL IN
NSN5998-00-563-0607
COMPONENT DIAGRAM
CONN A SFF-8482 CONN B SFF-8087 LENGTH: SAS CABLE ASSEMBLY | SFF-8482 to SFF-8087 Cable length: | SAS | Shielded TITLE CABLE ASSY PN 21095 MFR Bestway RESISTOR,VARIABLE,NONWIRE WOUND,
TECHNICAL CHARACTERISTICS (FLIS)
SPECIAL FEATURESCAPACITOR 2,CONTACTS 30,GUIDE 2,RESISTOR 4,PRINTED WIRING BOARD 1TRANSISTOR 1
OVERALL WIDTH3.500 INCHES NOMINAL IN
OVERALL HEIGHT0.570 INCHES NOMINAL IN
OVERALL LENGTH4.500 INCHES NOMINAL IN
SPECIAL FEATURESCAPACITOR 2,CONTACTS 30,GUIDE 2,RESISTOR 4,PRINTED WIRING BOARD 1TRANSISTOR 1
OVERALL WIDTH3.500 INCHES NOMINAL IN
OVERALL HEIGHT0.570 INCHES NOMINAL IN
OVERALL LENGTH4.500 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 7
21095Upgraded Successor
successor cross-reference
successor
A30512-9-7Interchangeable
interchangeable cross-reference
interchangeable
850710Interchangeable
interchangeable cross-reference
interchangeable
00044Interchangeable
interchangeable cross-reference
interchangeable
2100-0065Interchangeable
interchangeable cross-reference
interchangeable
6685PL2067099Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99ESD SensitiveNot HAZMAT
Ready to buy 21095?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 21095?
21095 is a RESISTOR,VARIABLE,NONWIRE WOUND, manufactured by Bestway. It is classified as a MRO (MRO_GENERAL).
What parts can replace 21095?
There are 7 known substitutes for 21095: 21095, A30512-9-7, 850710 and 4 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 21095?
21095 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5998-00-563-0607. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 21095