PartsTable
Technical Data Sheet
PartsTable / MRO / 2107-6-6
2107-6-6 ✓ Verified by PartsTable
— · MRO · MRO_GENERAL
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

The RESISTOR,FIXED,WIRE WOUND is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, body_width: 0.375 INCHES MAXIMUM IN, leg_length: 1.500 INCHES NOMINAL SECOND END IN, seat_angle: 30.0 DEGREES FIRST END, body_height: 0.120 INCHES MAXIMUM IN, body_length: 0.320 INCHES MAXIMUM IN. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-100-0614, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ 2107-6-6
NSN: 3110-00-100-0614
FSC: 3110
CAGE: 25681 — ITT GOULDS PUMPS, INC. (USA)
SPECIFICATIONS
materialSTEEL OVERALL
body_width0.375 INCHES MAXIMUM IN
leg_length1.500 INCHES NOMINAL SECOND END IN
seat_angle30.0 DEGREES FIRST END
body_height0.120 INCHES MAXIMUM IN
body_length0.320 INCHES MAXIMUM IN
overall_width1.3750 INCHES NOMINAL IN
terminal_typeWIRE LEAD
inclosure_typeENCAPSULATED
connection_typeTHREADED EXTERNAL PIPE SECOND END
terminal_length1.000 INCHES MINIMUM IN
connection_stylePLAIN (PIPE) SECOND END
NSN3110-00-100-0614
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: 2107-6-6 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
STANDARD TOLERANCE DESIGNATION: AFBMA CLASS 2
•
OUTSIDE DIAMETER: 7.5000 INCHES NOMINAL IN
•
BACKFACE CORNER RADIUS: 0.1250 INCHES NOMINAL IN
•
MATERIAL: STEEL OVERALL
•
STYLE DESIGNATOR: NORMAL ANGLE
TECHNICAL CHARACTERISTICS (FLIS)
OVERALL WIDTH1.3750 INCHES NOMINAL IN
STANDARD TOLERANCE DESIGNATIONAFBMA CLASS 2
OUTSIDE DIAMETER7.5000 INCHES NOMINAL IN
BACKFACE CORNER RADIUS0.1250 INCHES NOMINAL IN
MATERIALSTEEL OVERALL
STYLE DESIGNATORNORMAL ANGLE
VERIFIED SUBSTITUTES & CROSS-REFERENCES 19
X4-55Interchangeable
interchangeable cross-reference
interchangeable
10-2161Interchangeable
interchangeable cross-reference
interchangeable
001-1002-00-0-479Interchangeable
interchangeable cross-reference
interchangeable
301-24Interchangeable
interchangeable cross-reference
interchangeable
FTSM7Interchangeable
interchangeable cross-reference
interchangeable
B94.19 TABLE 1Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 2107-6-6?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 2107-6-6?
2107-6-6 is a RESISTOR,FIXED,WIRE WOUND. It is classified as a MRO (MRO_GENERAL).
What parts can replace 2107-6-6?
There are 19 known substitutes for 2107-6-6: X4-55, 10-2161, 001-1002-00-0-479 and 16 more. Substitute compatibility should be verified for your specific system.
Is 2107-6-6 still available?
2107-6-6 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 2107-6-6

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026