2106292-7 — SPACER,PLATE

✓ Government record, cited

— · COMPONENT

PRODUCT OVERVIEW

2106292-7: SPACER,PLATE.

The SPACER,PLATE is a the manufacturer industrial component. Key specifications include material: COPPER ALLOY 360, hole_diameter: 0.167 INCHES MINIMUM AND 0.175 INCHES MAXIMUM IN, overall_width: 1.625 INCHES NOMINAL IN, aperture_width: 0.397 INCHES MINIMUM AND 0.403 INCHES MAXIMUM IN, overall_length: 1.625 INCHES NOMINAL IN, aperture_length: 0.897 INCHES MINIMUM AND 0.903 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5365-00-004-9458, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS

2106292-7

NSN: 5365-00-004-9458
FSC: 5365 — Bushings, Rings, Shims, and Spacers
CAGE: 10001 — NAVAIR AND NAVSEA MANAGED ORIGINAL DESIGN ACTIVITY DWG NOT MATERIAL/PARTS SUPPLIER (USA)

SPECIFICATIONS

material	COPPER ALLOY 360
hole_diameter	0.167 INCHES MINIMUM AND 0.175 INCHES MAXIMUM IN
overall_width	1.625 INCHES NOMINAL IN
aperture_width	0.397 INCHES MINIMUM AND 0.403 INCHES MAXIMUM IN
overall_length	1.625 INCHES NOMINAL IN
aperture_length	0.897 INCHES MINIMUM AND 0.903 INCHES MAXIMUM IN
surface_treatment	SILVER
bolt_hole_quantity	4
inside_corner_radius	0.030 INCHES MAXIMUM IN
outside_corner_bevel_length_along_width	0.125 INCHES NOMINAL IN
outside_corner_bevel_length_along_length	0.125 INCHES NOMINAL IN
outside_edge_to_bolt_hole_center_distance_along_width	0.203 INCHES NOMINAL IN
NSN	5365-00-004-9458

COMPONENT DIAGRAM

KEY FEATURES

•

INSIDE CORNER RADIUS: 0.030 INCHES MAXIMUM IN

•

APERTURE WIDTH: 0.397 INCHES MINIMUM AND 0.403 INCHES MAXIMUM IN

•

OUTSIDE CORNER BEVEL LENGTH ALONG WIDTH: 0.125 INCHES NOMINAL IN

•

APERTURE LENGTH: 0.897 INCHES MINIMUM AND 0.903 INCHES MAXIMUM IN

•

OUTSIDE CORNER BEVEL LENGTH ALONG LENGTH: 0.125 INCHES NOMINAL IN

•

BOLT HOLE QUANTITY: 4

TECHNICAL CHARACTERISTICS

INSIDE CORNER RADIUS	0.030 INCHES MAXIMUM IN
OVERALL LENGTH	1.625 INCHES NOMINAL IN
OVERALL WIDTH	1.625 INCHES NOMINAL IN
APERTURE WIDTH	0.397 INCHES MINIMUM AND 0.403 INCHES MAXIMUM IN
OUTSIDE CORNER BEVEL LENGTH ALONG WIDTH	0.125 INCHES NOMINAL IN
APERTURE LENGTH	0.897 INCHES MINIMUM AND 0.903 INCHES MAXIMUM IN
OUTSIDE CORNER BEVEL LENGTH ALONG LENGTH	0.125 INCHES NOMINAL IN
BOLT HOLE QUANTITY	4
CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH	1.276 INCHES MINIMUM AND 1.284 INCHES MAXIMUM IN
SURFACE TREATMENT	SILVER

SUBSTITUTES & CROSS-REFERENCES 1

1086351-7Reference document

Same NSN cross-reference

Reference document — Secondary reference

LIFECYCLE

NSN statusActive· U.S. Government catalog

Acquisition advice: Terminal item — stock exhausted; no further procurementNo demilitarization required

Ready to buy 2106292-7?

Compare prices from verified sellers on eBay

Buy on eBay →

As an eBay Partner, PartsTable may earn a commission. Your price is not affected.

FREQUENTLY ASKED QUESTIONS

What is 2106292-7?

2106292-7 is a SPACER,PLATE.

What parts can replace 2106292-7?

There is 1 known substitute for 2106292-7: 1086351-7. Substitute compatibility should be verified for your specific system.

What is the NSN for 2106292-7?

2106292-7 is cataloged in the U.S. Government catalog under NSN 5365-00-004-9458. This indicates validated use in U.S. government and defense supply chains.

Community Feedback

2106292-7 — SPACER,PLATE

Request a Quote — 2106292-7