PartsTable
Technical Data Sheet
Download PDF

210330 — CAPACITOR,FIXED,CERAMIC DIELECTR

✓ Government record, cited
— · MRO · MRO_GENERAL
PRODUCT OVERVIEW

210330: CAPACITOR,FIXED,CERAMIC DIELECTR.

CAPACITOR,FIXED,CERAMIC DIELECTR. Key specifications include height: 6.000 INCHES NOMINAL IN, length: 24.000 INCHES NOMINAL IN, material: COPPER OVERALL, overall_length: 0.344 INCHES NOMINAL IN, overall_diameter: 3.125 INCHES NOMINAL IN, special_features: DISC STYLE. This part is cataloged in the U.S.

Government catalog under NSN 5340-00-696-4824, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ 210330
NSN: 5340-00-696-4824
NIINs: 006964824, 013852087, 014849081
FSC: 5340 — Hardware, Commercial
CAGE: 06853 — BENDIX COMMERCIAL VEHICLE SYSTEMS LLC DBA BENDIX COMMERCIAL VEHICLE SYSTEMS (USA)
SPECIFICATIONS
height6.000 INCHES NOMINAL IN
length24.000 INCHES NOMINAL IN
materialCOPPER OVERALL
overall_length0.344 INCHES NOMINAL IN
overall_diameter3.125 INCHES NOMINAL IN
special_featuresDISC STYLE
material_thickness2.000 INCHES NOMINAL IN
center_hole_diameter0.625 INCHES NOMINAL IN
heat_transfer_methodINDIRECT
base_material_thickness0.094 INCHES NOMINAL IN
capacitance_value_per_section33.000 PICOFARADS SINGLE SECTION
temp_coefficient_of_capacitance_per_section_in_ppm_per_deg_celsius0.0 SINGLE SECTION
NSN5340-00-696-4824
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 210330 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
OVERALL DIAMETER: 3.125 INCHES NOMINAL IN
•
CENTER HOLE DIAMETER: 0.625 INCHES NOMINAL IN
•
BASE MATERIAL THICKNESS: 0.094 INCHES NOMINAL IN
•
MATERIAL: RUBBER SYNTHETIC OVERALL
TYPICAL APPLICATIONS
  • RAID cache protection during power loss events
  • Write-back cache enablement for storage controllers
  • Enterprise server data integrity assurance
  • Hot-swap battery/capacitor replacement in production
TECHNICAL CHARACTERISTICS
OVERALL DIAMETER3.125 INCHES NOMINAL IN
OVERALL LENGTH0.344 INCHES NOMINAL IN
CENTER HOLE DIAMETER0.625 INCHES NOMINAL IN
BASE MATERIAL THICKNESS0.094 INCHES NOMINAL IN
MATERIALRUBBER SYNTHETIC OVERALL
SUBSTITUTES & CROSS-REFERENCES 1
2024580Reference document
Same NSN cross-reference
Reference document — Design control — primary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
No demilitarization required
Ready to buy 210330?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 210330?
210330 is a CAPACITOR,FIXED,CERAMIC DIELECTR. It is classified as a MRO (MRO_GENERAL).
What parts can replace 210330?
There is 1 known substitute for 210330: 2024580. Substitute compatibility should be verified for your specific system.
What is the NSN for 210330?
210330 is cataloged in the U.S. Government catalog under NSN 5340-00-696-4824. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 210330

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.