PartsTable
Technical Data Sheet
Download PDF

210292-10S — NUT,PLAIN,CAP

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

210292-10S: NUT,PLAIN,CAP.

The NUT,PLAIN,CAP is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, nut_style: CAP, nut_height: 0.840 INCHES NOMINAL IN, thread_series: UNF, thread_direction: RIGHT-HAND, surface_treatment: CADMIUM CAP. This part is cataloged in the U.S.

Government catalog under NSN 5310-01-004-6124, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
210292-10S
NSN: 5310-01-004-6124
FSC: 5310 — Nuts and Washers
CAGE: 01276 — DANFOSS POWER SOLUTIONS II, LLC (USA)
SPECIFICATIONS
materialSTEEL OVERALL
nut_styleCAP
nut_height0.840 INCHES NOMINAL IN
thread_seriesUNF
thread_directionRIGHT-HAND
surface_treatmentCADMIUM CAP
width_across_flats1.000 INCHES NOMINAL IN
nominal_thread_size0.875 INCHES IN
end_item_identificationFAMILY OF HEMTT VEHICLES (HEAVY EXPANDED MOBILITY TACTICAL TRUCKS)
thread_quantity_per_inch14
NSN5310-01-004-6124
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 210292-10S · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
WIDTH ACROSS FLATS: 1.000 INCHES NOMINAL IN
•
THREAD SERIES: UNF
•
THREAD DIRECTION: RIGHT-HAND
•
NOMINAL THREAD SIZE: 0.875 INCHES IN
•
NUT HEIGHT: 0.840 INCHES NOMINAL IN
•
SURFACE TREATMENT: CADMIUM CAP
•
NUT STYLE: CAP
TECHNICAL CHARACTERISTICS
WIDTH ACROSS FLATS1.000 INCHES NOMINAL IN
THREAD SERIESUNF
THREAD DIRECTIONRIGHT-HAND
NOMINAL THREAD SIZE0.875 INCHES IN
NUT HEIGHT0.840 INCHES NOMINAL IN
SURFACE TREATMENTCADMIUM CAP
NUT STYLECAP
END ITEM IDENTIFICATIONFAMILY OF HEMTT VEHICLES (HEAVY EXPANDED MOBILITY TACTICAL TRUCKS)
THREAD QUANTITY PER INCH14
MATERIALSTEEL OVERALL
OTHER ITEMS IN FSC 5310 — Nuts and Washers
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5310-00-000-0040 5310-00-000-0077 5310-00-000-0079 5310-00-000-1146 5310-00-000-3815 5310-00-000-4532 5310-00-000-4540
SUBSTITUTES & CROSS-REFERENCES 1
10 070112Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy 210292-10S?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 210292-10S?
210292-10S is a NUT,PLAIN,CAP.
What parts can replace 210292-10S?
There is 1 known substitute for 210292-10S: 10 070112. Substitute compatibility should be verified for your specific system.
What is the NSN for 210292-10S?
210292-10S is cataloged in the U.S. Government catalog under NSN 5310-01-004-6124. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 210292-10S

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.