PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 2101223
2101223 ✓ Verified by PartsTable
— · NUT WASHER
WHAT YOU NEED TO KNOW
Match nut grade to bolt grade for full strength Lock nuts prevent loosening under vibration
Don't mix grades — weakens the joint
PRODUCT OVERVIEW

The CAMSHAFT,ENGINE is a the manufacturer industrial component. Key specifications include end_item_identification: 4310-01-158-3262, furnished_items_and_quantity: 1 GEAR, engine_design_control_activity: 62445. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5310-00-721-5933, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
2101223
NSN: 5310-00-721-5933
FSC: 5310
CAGE: F0246 — RAMCO DIV RICHIER (FRA)
SPECIFICATIONS
end_item_identification4310-01-158-3262
engine_cylinder_quantity4
furnished_items_and_quantity1 GEAR
engine_design_control_activity62445
NSN5310-00-721-5933
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 2101223 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MATERIAL: STEEL COMP 1117 OR STEEL COMP 1020 OVERALL
•
THREAD QUANTITY PER INCH: 16
•
NOMINAL THREAD SIZE: 1.500 INCHES IN
•
THREAD SERIES: UN
•
BEARING SURFACE TYPE: WASHER FACED
•
NUT HEIGHT: 0.740 INCHES MINIMUM AND 0.760 INCHES MAXIMUM IN
•
THREAD CLASS: 3B
•
MATERIAL DOCUMENT AND CLASSIFICATION: SAE ASSN STD ALL MATERIAL RESPONSES OVERALL
TECHNICAL CHARACTERISTICS (FLIS)
MATERIALSTEEL COMP 1117 OR STEEL COMP 1020 OVERALL
THREAD QUANTITY PER INCH16
NOMINAL THREAD SIZE1.500 INCHES IN
THREAD SERIESUN
BEARING SURFACE TYPEWASHER FACED
NUT HEIGHT0.740 INCHES MINIMUM AND 0.760 INCHES MAXIMUM IN
THREAD CLASS3B
MATERIAL DOCUMENT AND CLASSIFICATIONSAE ASSN STD ALL MATERIAL RESPONSES OVERALL
THREAD DIRECTIONRIGHT-HAND
WIDTH ACROSS FLATS2.250 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 18
CTH8SW6A004Interchangeable
interchangeable cross-reference
interchangeable
CM41004151Interchangeable
interchangeable cross-reference
interchangeable
101223Interchangeable
interchangeable cross-reference
interchangeable
1N1183AInterchangeable
interchangeable cross-reference
interchangeable
570031-000Interchangeable
interchangeable cross-reference
interchangeable
371BInterchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 2101223?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 2101223?
2101223 is a CAMSHAFT,ENGINE.
What parts can replace 2101223?
There are 18 known substitutes for 2101223: CTH8SW6A004, CM41004151, 101223 and 15 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 2101223?
2101223 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5310-00-721-5933. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 2101223

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026