PartsTable
Technical Data Sheet
PartsTable / MRO / 21011-2
21011-2 ✓ Verified by PartsTable
— · MRO · MRO_GENERAL
WHAT YOU NEED TO KNOW
Grade/class stamped on head determines strength Metric and imperial threads look similar — measure pitch
Verify thread pitch — metric != imperial
PRODUCT OVERVIEW

RESISTOR,VARIABLE,NONWIRE WOUND,. Key specifications include material: STEEL OVERALL, end_style: 90 DEGREE PARALLEL, body_style: CYLINDRICAL BUSHING MOUNTED, flow_angle: 90.0 DEGREES, leg_length: 1.120 INCHES NOMINAL ALL ENDS IN, ring_style: STRAIGHT GAP. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5325-00-101-2831, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ 21011-2
NSN: 5325-00-101-2831
FSC: 5325
CAGE: R1120 — SATAIR A/S (DNK)
SPECIFICATIONS
materialSTEEL OVERALL
end_style90 DEGREE PARALLEL
body_styleCYLINDRICAL BUSHING MOUNTED
flow_angle90.0 DEGREES
leg_length1.120 INCHES NOMINAL ALL ENDS IN
ring_styleSTRAIGHT GAP
body_length1.266 INCHES MAXIMUM IN
shaft_styleROUND
shaft_length0.875 INCHES NOMINAL IN
usage_designEXTERNAL
actuator_typeSINGLE SHAFT
body_diameter1.156 INCHES MAXIMUM IN
NSN5325-00-101-2831
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: 21011-2 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CASEHARDENING INDICATOR: NOT CASEHARDENED
•
USAGE DESIGN: EXTERNAL
•
RING STYLE: STRAIGHT GAP
•
SURFACE TREATMENT: PASSIVATE
•
MATERIAL: STEEL CORROSION RESISTING
•
INSIDE DIAMETER: 0.770 INCHES NOMINAL IN
•
OUTSIDE DIAMETER: 0.890 INCHES NOMINAL IN
•
CROSS-SECTIONAL SHAPE STYLE: ROUND
TECHNICAL CHARACTERISTICS (FLIS)
CASEHARDENING INDICATORNOT CASEHARDENED
USAGE DESIGNEXTERNAL
RING STYLESTRAIGHT GAP
SURFACE TREATMENTPASSIVATE
MATERIALSTEEL CORROSION RESISTING
INSIDE DIAMETER0.770 INCHES NOMINAL IN
OUTSIDE DIAMETER0.890 INCHES NOMINAL IN
CROSS-SECTIONAL SHAPE STYLEROUND
END STYLE90 DEGREE PARALLEL
MATERIAL DIAMETER0.060 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 8
210112Interchangeable
interchangeable cross-reference
interchangeable
216310Interchangeable
interchangeable cross-reference
interchangeable
816699Interchangeable
interchangeable cross-reference
interchangeable
269AB-8-8Interchangeable
interchangeable cross-reference
interchangeable
2100-0075Interchangeable
interchangeable cross-reference
interchangeable
B16.11Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 21011-2?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 21011-2?
21011-2 is a RESISTOR,VARIABLE,NONWIRE WOUND,. It is classified as a MRO (MRO_GENERAL).
What parts can replace 21011-2?
There are 8 known substitutes for 21011-2: 210112, 216310, 816699 and 5 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 21011-2?
21011-2 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5325-00-101-2831. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 21011-2

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026