PartsTable
Technical Data Sheet
PartsTable / MRO / 210012
210012 ✓ Verified by PartsTable
— · MRO · MRO_GENERAL
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

RESISTOR,VARIABLE,WIRE WOUND,NON. Key specifications include length: 1.250 INCHES NOMINAL IN, material: STEEL OVERALL, body_style: CYLINDRICAL TAB/FLANGE MOUNTED, body_length: 0.375 INCHES NOMINAL IN, insert_size: 1-1/8-7 NC CLASS 2 FIT, actuator_type: FLUSH DRIVE WITH SLOT-HOLE. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-100-0379, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ 210012
NSN: 3110-00-100-0379
FSC: 3110
CAGE: 92392 — ALLIS-CHALMERS CORP (USA)
SPECIFICATIONS
length1.250 INCHES NOMINAL IN
materialSTEEL OVERALL
body_styleCYLINDRICAL TAB/FLANGE MOUNTED
body_length0.375 INCHES NOMINAL IN
insert_size1-1/8-7 NC CLASS 2 FIT
actuator_typeFLUSH DRIVE WITH SLOT-HOLE
body_diameter0.781 INCHES NOMINAL IN
overall_width0.9375 INCHES NOMINAL IN
mounting_methodTAB AND UNTHREADED HOLE(S)
outside_diameter3.3750 INCHES NOMINAL IN
section_quantity1
special_featuresFVS 2 SECTION; 4 LAMP; LOW LEAK; CLUSTER SWITCHING AND FILM ACTUATOR
NSN3110-00-100-0379
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: 210012 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
BACKFACE CORNER RADIUS: 0.0469 INCHES NOMINAL IN
•
STANDARD TOLERANCE DESIGNATION: AFBMA CLASS 2
•
STYLE DESIGNATOR: NORMAL ANGLE
•
MATERIAL: STEEL OVERALL
•
OUTSIDE DIAMETER: 3.3750 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
BACKFACE CORNER RADIUS0.0469 INCHES NOMINAL IN
STANDARD TOLERANCE DESIGNATIONAFBMA CLASS 2
OVERALL WIDTH0.9375 INCHES NOMINAL IN
STYLE DESIGNATORNORMAL ANGLE
MATERIALSTEEL OVERALL
OUTSIDE DIAMETER3.3750 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 21
3821Interchangeable
interchangeable cross-reference
interchangeable
14204Interchangeable
interchangeable cross-reference
interchangeable
10A7292Interchangeable
interchangeable cross-reference
interchangeable
45733Interchangeable
interchangeable cross-reference
interchangeable
900735Interchangeable
interchangeable cross-reference
interchangeable
F400A336Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 210012?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 210012?
210012 is a RESISTOR,VARIABLE,WIRE WOUND,NON. It is classified as a MRO (MRO_GENERAL).
What parts can replace 210012?
There are 21 known substitutes for 210012: 3821, 14204, 10A7292 and 18 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 210012?
210012 is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-100-0379. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 210012

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026