PartsTable
Technical Data Sheet
Download PDF

210011 — RESISTOR,VARIABLE,WIRE WOUND,NON

✓ Government record, cited
— · MRO · MRO_GENERAL
PRODUCT OVERVIEW

210011: RESISTOR,VARIABLE,WIRE WOUND,NON.

RESISTOR,VARIABLE,WIRE WOUND,NON. Key specifications include jaw_type: CURVED, material: STEEL CORROSION RESISTING OVERALL, tip_type: MOSQUITO POINT, grip_type: FINGER RING, nut_style: HEXAGON, body_style: CYLINDRICAL. This part is cataloged in the U.S.

Government catalog under NSN 3110-00-100-3107, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ 210011
NSN: 3110-00-100-3107
NIINs: 001003107, 003344900, 005362319, 009190159, 011217639, 011233719, 011939222, 012064924, 012688004, 014224567, 016142190, 016585573
FSC: 3110 — Bearings, Antifriction, Unmounted
CAGE: 25681 — ITT GOULDS PUMPS, INC. (USA)
SPECIFICATIONS
jaw_typeCURVED
materialSTEEL CORROSION RESISTING OVERALL
tip_typeMOSQUITO POINT
grip_typeFINGER RING
nut_styleHEXAGON
body_styleCYLINDRICAL
cone_width1.1875 INCHES NOMINAL IN
jaw_length0.875 INCHES NOMINAL IN
joint_typeBOX LOCK
nut_height0.264 INCHES NOMINAL IN
body_length0.688 INCHES NOMINAL IN
thread_class2B
NSN3110-00-100-3107
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: 210011 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
STYLE DESIGNATOR: NORMAL ANGLE
•
CONE CORNER RADIUS: 0.1406 INCHES NOMINAL IN
•
CONE WIDTH: 1.1875 INCHES NOMINAL IN
•
STANDARD TOLERANCE DESIGNATION: AFBMA CLASS 2
•
BORE DIAMETER: 1.5000 INCHES NOMINAL IN
•
MATERIAL: STEEL OVERALL
TECHNICAL CHARACTERISTICS
STYLE DESIGNATORNORMAL ANGLE
CONE CORNER RADIUS0.1406 INCHES NOMINAL IN
CONE WIDTH1.1875 INCHES NOMINAL IN
STANDARD TOLERANCE DESIGNATIONAFBMA CLASS 2
BORE DIAMETER1.5000 INCHES NOMINAL IN
MATERIALSTEEL OVERALL
SUBSTITUTES & CROSS-REFERENCES 5
900736Reference document
Same NSN cross-reference
Reference document — Secondary reference
3876Reference document
Same NSN cross-reference
Reference document — Secondary reference
K3876Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
X3383Reference document
Same NSN cross-reference
Reference document — Secondary reference
567226Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy 210011?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 210011?
210011 is a RESISTOR,VARIABLE,WIRE WOUND,NON. It is classified as a MRO (MRO_GENERAL).
What parts can replace 210011?
There are 5 known substitutes for 210011: 900736, 3876, K3876 and 2 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 210011?
210011 is cataloged in the U.S. Government catalog under NSN 3110-00-100-3107. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 210011