PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 210-P
210-P ✓ Verified by PartsTable
— · TAPERED BEARING
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

The BEARING,BALL,ANNULAR is a the manufacturer industrial component. Key specifications include gas_for_which_designed: AIR, intake_connection_type: THREADED FEMALE, drive_shaft_end_diameter: 10.750 INCHES NOMINAL IN, discharge_connection_type: THREADED FEMALE, centrifugal_compressor_design: AXIAL FLOW. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-155-6216, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
210-P
NSN: 3110-00-155-6216
FSC: 3110
CAGE: 43991 — FAG BEARINGS CORPORATION (USA)
SPECIFICATIONS
gas_for_which_designedAIR
intake_connection_typeTHREADED FEMALE
drive_shaft_end_diameter10.750 INCHES NOMINAL IN
discharge_connection_typeTHREADED FEMALE
intake_connection_quantity1
centrifugal_compressor_designAXIAL FLOW
discharge_connection_quantity1
NSN3110-00-155-6216
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: 210-P · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SURFACE FINISH: GROUND
•
SHIELD QUANTITY: 1
•
MATERIAL: STEEL SHIELD
•
STYLE DESIGNATOR: NON-LOADING GROOVE, NON-SEPARABLE
•
LOAD DIRECTION: RADIAL
TECHNICAL CHARACTERISTICS (FLIS)
SURFACE FINISHGROUND
SHIELD QUANTITY1
MATERIALSTEEL SHIELD
STYLE DESIGNATORNON-LOADING GROOVE, NON-SEPARABLE
MATERIALSTEEL OUTER RING
MATERIALSTEEL INNER RING
MATERIALSTEEL BALL
LOAD DIRECTIONRADIAL
OVERALL OUTSIDE DIAMETER90.00 MILLIMETERS NOMINAL MM
OVERALL WIDTH20.0 MILLIMETERS NOMINAL MM
VERIFIED SUBSTITUTES & CROSS-REFERENCES 28
7510LR1214AInterchangeable
interchangeable cross-reference
interchangeable
9433260Interchangeable
interchangeable cross-reference
interchangeable
N6400Interchangeable
interchangeable cross-reference
interchangeable
7-510Interchangeable
interchangeable cross-reference
interchangeable
8019136P41Interchangeable
interchangeable cross-reference
interchangeable
C9857PInterchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 210-P?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 210-P?
210-P is a BEARING,BALL,ANNULAR.
What parts can replace 210-P?
There are 28 known substitutes for 210-P: 7510LR1214A, 9433260, N6400 and 25 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 210-P?
210-P is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-155-6216. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 210-P

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026