PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 210-33923-1
210-33923-1 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The GASKET is a the manufacturer industrial component. Key specifications include material: ALUMINUM ALLOY 6061 OVERALL, temp_rating: -65.0 FAHRENHEIT AND 160.0 FAHRENHEIT DEGF, hole_diameter: 0.234 INCHES MINIMUM AND 0.244 INCHES MAXIMUM LOCATION NOT OTHERWISE SPECIFIED IN, aperture_diameter: 1.750 INCHES NOMINAL IN, surface_treatment: ANODIZE OVERALL, bolt_circle_diameter: 2.540 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-899-1008, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
210-33923-1
NSN: 5330-00-899-1008
FSC: 5330
CAGE: 80378 — TRIUMPH AEROSTRUCTURES, LLC DBA TRIUMPH AEROSTRUCTURES - VOUGHT INTEGRATED PROGRAMS DIVISION (USA)
SPECIFICATIONS
materialALUMINUM ALLOY 6061 OVERALL
temp_rating-65.0 FAHRENHEIT AND 160.0 FAHRENHEIT DEGF
hole_diameter0.234 INCHES MINIMUM AND 0.244 INCHES MAXIMUM LOCATION NOT OTHERWISE SPECIFIED IN
aperture_diameter1.750 INCHES NOMINAL IN
surface_treatmentANODIZE OVERALL
bolt_circle_diameter2.540 INCHES NOMINAL IN
outside_corner_radius0.310 INCHES NOMINAL IN
cross-sectional_thickness0.051 INCHES MINIMUM AND 0.055 INCHES MAXIMUM IN
cross-sectional_shape_styleRECTANGULAR METAL
side_radius_from_gasket_center1.060 INCHES NOMINAL IN
material_document_and_classificationQQ-A-250/11 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
surface_treatment_document_and_classificationMIL-A-8625 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL
NSN5330-00-899-1008
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 210-33923-1 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SURFACE TREATMENT: ANODIZE OVERALL
•
SIDE RADIUS FROM GASKET CENTER: 1.060 INCHES NOMINAL IN
•
APERTURE DIAMETER: 1.750 INCHES NOMINAL IN
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: MIL-A-8625 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL
•
MATERIAL: ALUMINUM ALLOY 6061 OVERALL
•
OUTSIDE CORNER RADIUS: 0.310 INCHES NOMINAL IN
•
TEMP RATING: -65.0 FAHRENHEIT AND 160.0 FAHRENHEIT DEGF
•
CROSS-SECTIONAL THICKNESS: 0.051 INCHES MINIMUM AND 0.055 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS (FLIS)
SURFACE TREATMENTANODIZE OVERALL
SIDE RADIUS FROM GASKET CENTER1.060 INCHES NOMINAL IN
APERTURE DIAMETER1.750 INCHES NOMINAL IN
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONMIL-A-8625 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL
MATERIALALUMINUM ALLOY 6061 OVERALL
OUTSIDE CORNER RADIUS0.310 INCHES NOMINAL IN
TEMP RATING-65.0 FAHRENHEIT AND 160.0 FAHRENHEIT DEGF
CROSS-SECTIONAL THICKNESS0.051 INCHES MINIMUM AND 0.055 INCHES MAXIMUM IN
HOLE DIAMETER0.234 INCHES MINIMUM AND 0.244 INCHES MAXIMUM LOCATION NOT OTHERWISE SPECIFIED IN
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-A-250/11 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
VERIFIED SUBSTITUTES & CROSS-REFERENCES 6
40087Interchangeable
interchangeable cross-reference
interchangeable
2304-0087Interchangeable
interchangeable cross-reference
interchangeable
699681Interchangeable
interchangeable cross-reference
interchangeable
B94.19 TABLE 5Interchangeable
interchangeable cross-reference
interchangeable
612 6X7/8X1-1/4Interchangeable
interchangeable cross-reference
interchangeable
307-27Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 210-33923-1?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 210-33923-1?
210-33923-1 is a GASKET.
What parts can replace 210-33923-1?
There are 6 known substitutes for 210-33923-1: 40087, 2304-0087, 699681 and 3 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 210-33923-1?
210-33923-1 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-899-1008. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 210-33923-1

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026