PartsTable
Technical Data Sheet
PartsTable / MRO / 210-154
210-154 ✓ Verified by PartsTable
— · MRO · MRO_GENERAL
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

RESISTOR,VARIABLE,NONWIRE WOUND,. Key specifications include material: ALUMINUM, body_style: CYLINDRICAL BUSHING MOUNTED, bore_shape: STRAIGHT, body_length: 0.453 INCHES NOMINAL IN, shaft_style: ROUND, shaft_length: 0.125 INCHES NOMINAL IN. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-293-8908, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ 210-154
NSN: 3110-00-293-8908
FSC: 3110
CAGE: K0160 — LISTER PETTER LTD (GBR)
SPECIFICATIONS
materialALUMINUM
body_styleCYLINDRICAL BUSHING MOUNTED
bore_shapeSTRAIGHT
body_length0.453 INCHES NOMINAL IN
shaft_styleROUND
shaft_length0.125 INCHES NOMINAL IN
actuator_typeDOUBLE ENDED SHAFT
body_diameter0.938 INCHES NOMINAL IN
bore_diameter1.5000 INCHES NOMINAL IN
overall_width39.000 INCHES NOMINAL IN
load_directionRADIAL
shaft_diameter0.156 INCHES NOMINAL IN
NSN3110-00-293-8908
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: 210-154 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
OVERALL OUTSIDE DIAMETER: 3.7500 INCHES NOMINAL IN
•
BORE SHAPE: STRAIGHT
•
MATERIAL: STEEL OVERALL
•
STYLE DESIGNATOR: NON-LOADING GROOVE, NON-SEPARABLE
•
RETAINER FABRICATION METHOD: PRESSED
•
SURFACE FINISH: GROUND
•
BORE DIAMETER: 1.5000 INCHES NOMINAL IN
•
STANDARD TOLERANCE DESIGNATION: ABEC NO.1
TECHNICAL CHARACTERISTICS (FLIS)
OVERALL OUTSIDE DIAMETER3.7500 INCHES NOMINAL IN
BORE SHAPESTRAIGHT
MATERIALSTEEL OVERALL
STYLE DESIGNATORNON-LOADING GROOVE, NON-SEPARABLE
RETAINER FABRICATION METHODPRESSED
SURFACE FINISHGROUND
BORE DIAMETER1.5000 INCHES NOMINAL IN
STANDARD TOLERANCE DESIGNATIONABEC NO.1
LOAD DIRECTIONRADIAL
OVERALL WIDTH0.9375 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 11
H11Interchangeable
interchangeable cross-reference
interchangeable
H011Interchangeable
interchangeable cross-reference
interchangeable
H1Interchangeable
interchangeable cross-reference
interchangeable
571-3402-1303157PCSP55Interchangeable
interchangeable cross-reference
interchangeable
WS506Interchangeable
interchangeable cross-reference
interchangeable
AL9Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 210-154?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 210-154?
210-154 is a RESISTOR,VARIABLE,NONWIRE WOUND,. It is classified as a MRO (MRO_GENERAL).
What parts can replace 210-154?
There are 11 known substitutes for 210-154: H11, H011, H1 and 8 more. Substitute compatibility should be verified for your specific system.
Is 210-154 still available?
210-154 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 210-154

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026