PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 210-0863-00A
210-0863-00A ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The STRAP,RETAINING is a the manufacturer industrial component. Key specifications include cushion: NOT INCLUDED, material: STEEL LOCATION NOT OTHERWISE SPECIFIED, mounting_pad: NOT INCLUDED, overall_width: 0.420 INCHES MINIMUM AND 0.450 INCHES MAXIMUM IN, overall_length: 0.582 INCHES NOMINAL IN, style_designator: STRAIGHT ARCH. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-364-9928, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
210-0863-00A
NSN: 5340-00-364-9928
FSC: 5340
CAGE: 80009 — TEKTRONIX, INC. (USA)
SPECIFICATIONS
cushionNOT INCLUDED
materialSTEEL LOCATION NOT OTHERWISE SPECIFIED
mounting_padNOT INCLUDED
overall_width0.420 INCHES MINIMUM AND 0.450 INCHES MAXIMUM IN
overall_length0.582 INCHES NOMINAL IN
style_designatorSTRAIGHT ARCH
surface_treatmentCADMIUM AND CHROMATE
material_thickness0.031 INCHES NOMINAL IN
mounting_hole_size0.191 INCHES NOMINAL IN
inside_diameter/arch_length0.510 INCHES MINIMUM AND 0.530 INCHES MAXIMUM IN
distance_between_base_and_inside_of_arch0.070 INCHES MINIMUM AND 0.090 INCHES MAXIMUM IN
NSN5340-00-364-9928
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 210-0863-00A MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MOUNTING HOLE SIZE: 0.191 INCHES NOMINAL IN
•
SURFACE TREATMENT: CADMIUM AND CHROMATE
•
MATERIAL: STEEL LOCATION NOT OTHERWISE SPECIFIED
•
STYLE DESIGNATOR: STRAIGHT ARCH
•
MATERIAL THICKNESS: 0.031 INCHES NOMINAL IN
•
INSIDE DIAMETER/ARCH LENGTH: 0.510 INCHES MINIMUM AND 0.530 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS (FLIS)
MOUNTING HOLE SIZE0.191 INCHES NOMINAL IN
OVERALL WIDTH0.420 INCHES MINIMUM AND 0.450 INCHES MAXIMUM IN
SURFACE TREATMENTCADMIUM AND CHROMATE
MATERIALSTEEL LOCATION NOT OTHERWISE SPECIFIED
STYLE DESIGNATORSTRAIGHT ARCH
MATERIAL THICKNESS0.031 INCHES NOMINAL IN
INSIDE DIAMETER/ARCH LENGTH0.510 INCHES MINIMUM AND 0.530 INCHES MAXIMUM IN
OVERALL LENGTH0.582 INCHES NOMINAL IN
MOUNTING PADNOT INCLUDED
DISTANCE BETWEEN BASE AND INSIDE OF ARCH0.070 INCHES MINIMUM AND 0.090 INCHES MAXIMUM IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 13
C191Interchangeable
interchangeable cross-reference
interchangeable
302E4765Interchangeable
interchangeable cross-reference
interchangeable
L07B2Interchangeable
interchangeable cross-reference
interchangeable
Z10-1Interchangeable
interchangeable cross-reference
interchangeable
13P228Interchangeable
interchangeable cross-reference
interchangeable
CH400Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 210-0863-00A?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 210-0863-00A?
210-0863-00A is a STRAP,RETAINING.
What parts can replace 210-0863-00A?
There are 13 known substitutes for 210-0863-00A: C191, 302E4765, L07B2 and 10 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 210-0863-00A?
210-0863-00A is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-364-9928. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 210-0863-00A

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026