PartsTable
Technical Data Sheet
PartsTable / MRO / 21-0765
21-0765 ✓ Verified by PartsTable
— · MRO · MRO_GENERAL
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

The RESISTOR,FIXED,WIRE WOUND is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, body_width: 0.375 INCHES MAXIMUM IN, head_angle: 15.0 DEGREES NOMINAL, body_height: 0.120 INCHES MAXIMUM IN, body_length: 0.320 INCHES MAXIMUM IN, terminal_type: WIRE LEAD. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-100-3655, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ 21-0765
NSN: 3110-00-100-3655
FSC: 3110
CAGE: 92392 — ALLIS-CHALMERS CORP (USA)
SPECIFICATIONS
materialSTEEL OVERALL
body_width0.375 INCHES MAXIMUM IN
head_angle15.0 DEGREES NOMINAL
body_height0.120 INCHES MAXIMUM IN
body_length0.320 INCHES MAXIMUM IN
terminal_typeWIRE LEAD
inclosure_typeENCAPSULATED
overall_length6.100 INCHES MINIMUM AND 7.090 INCHES MAXIMUM IN
terminal_length1.000 INCHES MINIMUM IN
style_designatorTERMINALS ONE EDGE
surface_treatmentCHROMIUM OVERALL
electrical_resistance31.600 OHMS
NSN3110-00-100-3655
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: 21-0765 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
VERIFIED SUBSTITUTES & CROSS-REFERENCES 21
92985Interchangeable
interchangeable cross-reference
interchangeable
71450Interchangeable
interchangeable cross-reference
interchangeable
AS954Interchangeable
interchangeable cross-reference
interchangeable
GGG-W-636 TY3Interchangeable
interchangeable cross-reference
interchangeable
21-0765Interchangeable
interchangeable cross-reference
interchangeable
8627650Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 21-0765?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 21-0765?
21-0765 is a RESISTOR,FIXED,WIRE WOUND. It is classified as a MRO (MRO_GENERAL).
What parts can replace 21-0765?
There are 21 known substitutes for 21-0765: 92985, 71450, AS954 and 18 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 21-0765?
21-0765 is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-100-3655. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 21-0765

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026