PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 209MEC1
209MEC1 ✓ Verified by PartsTable
— · TAPERED BEARING
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

CONE AND ROLLERS,TAPERED ROLLER. Key specifications include material: STEEL OVERALL, cone_width: 1.6250 INCHES NOMINAL IN, bore_diameter: 2.8125 INCHES NOMINAL IN, special_features: DUTY CLASS H SERIES, style_designator: NORMAL ANGLE, cone_corner_radius: 0.1400 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-277-0714, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
209MEC1
NSN: 3110-00-277-0714
FSC: 3110
CAGE: 05415 — LINDE LIFT TRUCK CORP. (USA)
SPECIFICATIONS
materialSTEEL OVERALL
cone_width1.6250 INCHES NOMINAL IN
bore_diameter2.8125 INCHES NOMINAL IN
special_featuresDUTY CLASS H SERIES
style_designatorNORMAL ANGLE
cone_corner_radius0.1400 INCHES NOMINAL IN
standard_tolerance_designationAFBMA CLASS 2
NSN3110-00-277-0714
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: 209MEC1 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CONE WIDTH: 1.6250 INCHES NOMINAL IN
•
STYLE DESIGNATOR: NORMAL ANGLE
•
STANDARD TOLERANCE DESIGNATION: AFBMA CLASS 2
•
CONE CORNER RADIUS: 0.1400 INCHES NOMINAL IN
•
BORE DIAMETER: 2.8125 INCHES NOMINAL IN
•
MATERIAL: STEEL OVERALL
TYPICAL APPLICATIONS
  • Long-term data archival and compliance retention
  • Offsite backup and disaster recovery
  • Air-gapped ransomware protection
  • Cold storage tier for infrequently accessed data
TECHNICAL CHARACTERISTICS (FLIS)
CONE WIDTH1.6250 INCHES NOMINAL IN
STYLE DESIGNATORNORMAL ANGLE
SPECIAL FEATURESDUTY CLASS H SERIES
STANDARD TOLERANCE DESIGNATIONAFBMA CLASS 2
CONE CORNER RADIUS0.1400 INCHES NOMINAL IN
BORE DIAMETER2.8125 INCHES NOMINAL IN
MATERIALSTEEL OVERALL
VERIFIED SUBSTITUTES & CROSS-REFERENCES 27
0210548-4Interchangeable
interchangeable cross-reference
interchangeable
JT9009Interchangeable
interchangeable cross-reference
interchangeable
210548Interchangeable
interchangeable cross-reference
interchangeable
25520Interchangeable
interchangeable cross-reference
interchangeable
130503HInterchangeable
interchangeable cross-reference
interchangeable
4253291-1Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 209MEC1?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 209MEC1?
209MEC1 is a CONE AND ROLLERS,TAPERED ROLLER.
What parts can replace 209MEC1?
There are 27 known substitutes for 209MEC1: 0210548-4, JT9009, 210548 and 24 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 209MEC1?
209MEC1 is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-277-0714. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 209MEC1

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026