PartsTable
Technical Data Sheet
Download PDF

209F-0015 — SCREW,MACHINE

✓ Government record, cited
— · BOLT SCREW
PRODUCT OVERVIEW

209F-0015: SCREW,MACHINE.

The SCREW,MACHINE is a the manufacturer industrial component. Key specifications include head_style: PAN, head_height: 0.099 INCHES MINIMUM AND 0.110 INCHES MAXIMUM IN, thread_class: 2A A, head_diameter: 0.357 INCHES MINIMUM AND 0.373 INCHES MAXIMUM IN, thread_length: 0.750 INCHES NOMINAL IN, fastener_length: 0.750 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5305-01-504-0737, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
209F-0015
NSN: 5305-01-504-0737
FSC: 5305 — Screws
CAGE: 03533 — CRANE CARRIER COMPANY, LLC (USA)
SPECIFICATIONS
head_stylePAN
head_height0.099 INCHES MINIMUM AND 0.110 INCHES MAXIMUM IN
thread_class2A A
head_diameter0.357 INCHES MINIMUM AND 0.373 INCHES MAXIMUM IN
thread_length0.750 INCHES NOMINAL IN
fastener_length0.750 INCHES NOMINAL IN
thread_directionRIGHT-HAND
end_item_identification2320014525579
nominal_thread_diameter0.190 INCHES IN
screw_surface_treatmentZINC
thread_quantity_per_inch32
thread_series_designatorUNF
NSN5305-01-504-0737
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: 209F-0015 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
HEAD HEIGHT: 0.099 INCHES MINIMUM AND 0.110 INCHES MAXIMUM IN
•
SCREW SURFACE TREATMENT: ZINC
•
FASTENER LENGTH: 0.750 INCHES NOMINAL IN
•
THREAD LENGTH: 0.750 INCHES NOMINAL IN
•
NOMINAL THREAD DIAMETER: 0.190 INCHES IN
•
HEAD STYLE: PAN
•
THREAD DIRECTION: RIGHT-HAND
•
THREAD CLASS: 2A A
TECHNICAL CHARACTERISTICS
HEAD HEIGHT0.099 INCHES MINIMUM AND 0.110 INCHES MAXIMUM IN
SCREW SURFACE TREATMENTZINC
FASTENER LENGTH0.750 INCHES NOMINAL IN
THREAD LENGTH0.750 INCHES NOMINAL IN
NOMINAL THREAD DIAMETER0.190 INCHES IN
HEAD STYLEPAN
THREAD DIRECTIONRIGHT-HAND
THREAD CLASS2A A
END ITEM IDENTIFICATION2320014525579
THREAD QUANTITY PER INCH32
SUBSTITUTES & CROSS-REFERENCES 1
209C4Reference document
Same NSN cross-reference
Reference document — Drawing number reference only
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 209F-0015?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 209F-0015?
209F-0015 is a SCREW,MACHINE.
What parts can replace 209F-0015?
There is 1 known substitute for 209F-0015: 209C4. Substitute compatibility should be verified for your specific system.
What is the NSN for 209F-0015?
209F-0015 is cataloged in the U.S. Government catalog under NSN 5305-01-504-0737. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 209F-0015

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.