PartsTable
Technical Data Sheet
Download PDF

2099-730 — PUMP,HYDRAULIC

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

2099-730: PUMP,HYDRAULIC.

The PUMP,HYDRAULIC is a the manufacturer industrial component. Key specifications include handle_height: 1.788 INCHES NOMINAL IN, overall_width: 2.875 INCHES NOMINAL IN, mounting_method: THREADED STUD(S), special_features: SMALL HANDLE, end_item_identification: C-12844/U, mounting_facility_diameter: 0.625 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-616-0953, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
2099-730
NSN: 5340-01-616-0953
NIINs: 016160953, 016184542
FSC: 5340 — Hardware, Commercial
CAGE: 66544 — FRONTGRADE TECHNOLOGIES INC. (USA)
SPECIFICATIONS
handle_height1.788 INCHES NOMINAL IN
overall_width2.875 INCHES NOMINAL IN
mounting_methodTHREADED STUD(S)
special_featuresSMALL HANDLE
end_item_identificationC-12844/U
mounting_facility_diameter0.625 INCHES NOMINAL IN
part_name_assigned_by_controlling_agencyKIT, FRONT PANEL HANDLE
center_to_center_distance_between_mounting_facilities_parallel_to_length2.500 INCHES NOMINAL IN
NSN5340-01-616-0953
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 2099-730 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MOUNTING FACILITY DIAMETER: 0.625 INCHES NOMINAL IN
•
HANDLE HEIGHT: 1.788 INCHES NOMINAL IN
•
CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO LENGTH: 2.500 INCHES NOMINAL IN
•
MOUNTING METHOD: THREADED STUD(S)
TECHNICAL CHARACTERISTICS
MOUNTING FACILITY DIAMETER0.625 INCHES NOMINAL IN
HANDLE HEIGHT1.788 INCHES NOMINAL IN
CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO LENGTH2.500 INCHES NOMINAL IN
MOUNTING METHODTHREADED STUD(S)
OVERALL WIDTH2.875 INCHES NOMINAL IN
SPECIAL FEATURESSMALL HANDLE
PART NAME ASSIGNED BY CONTROLLING AGENCYKIT, FRONT PANEL HANDLE
END ITEM IDENTIFICATIONC-12844/U
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 2099-730?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 2099-730?
2099-730 is a PUMP,HYDRAULIC.
What is the NSN for 2099-730?
2099-730 is cataloged in the U.S. Government catalog under NSN 5340-01-616-0953. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 2099-730

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.