PartsTable
Technical Data Sheet
Download PDF

2099 — FILTER,RADIO FREQUENCY INTERFERE

✓ Government record, cited
Hama · MRO · MRO_GENERAL
PRODUCT OVERVIEW

2099: FILTER,RADIO FREQUENCY INTERFERE.

FILTER,RADIO FREQUENCY INTERFERE. Key specifications include part_name_assigned_by_controlling_agency: OMK-36P ENTERPRISE PLUS-QUAD TEST KIT. This part is cataloged in the U.S.

Government catalog under NSN 5305-00-026-2597, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ 2099
NSN: 5305-00-026-2597
NIINs: 000262597, 001416917, 001486776, 002365362, 002443685, 003214999, 004166575, 004195561, 004679939, 006183448, 010934142, 011129270, 011212099, 013231505, 013488976, 016788685
FSC: 5305 — Screws
CAGE: 31211 — MOTOROLA AUTOMOTIVE ELECTRONICS (USA)
SPECIFICATIONS
part_name_assigned_by_controlling_agencyOMK-36P ENTERPRISE PLUS-QUAD TEST KIT
NSN5305-00-026-2597
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: 2099 · Hama ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
NONMACHINE NOMINAL THREAD DIAMETER: 0.190 INCHES IN
•
EXTENDED WASHER THICKNESS: 0.050 INCHES MINIMUM AND 0.060 INCHES MAXIMUM IN
•
HEAD HEIGHT: 0.165 INCHES MINIMUM AND 0.170 INCHES MAXIMUM IN
•
FASTENER LENGTH: 0.500 INCHES NOMINAL IN
•
EXTENDED WASHER DIAMETER: 0.384 INCHES MINIMUM AND 0.414 INCHES MAXIMUM IN
•
NONMACHINE THREAD STYLE: DOG TYPE (TYPE B OR C)
•
HEAD STYLE: HEXAGON EXTENDED WASHER
•
WIDTH BETWEEN FLATS: 0.305 INCHES MINIMUM AND 0.312 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS
NONMACHINE NOMINAL THREAD DIAMETER0.190 INCHES IN
EXTENDED WASHER THICKNESS0.050 INCHES MINIMUM AND 0.060 INCHES MAXIMUM IN
HEAD HEIGHT0.165 INCHES MINIMUM AND 0.170 INCHES MAXIMUM IN
FASTENER LENGTH0.500 INCHES NOMINAL IN
EXTENDED WASHER DIAMETER0.384 INCHES MINIMUM AND 0.414 INCHES MAXIMUM IN
NONMACHINE THREAD STYLEDOG TYPE (TYPE B OR C)
HEAD STYLEHEXAGON EXTENDED WASHER
WIDTH BETWEEN FLATS0.305 INCHES MINIMUM AND 0.312 INCHES MAXIMUM IN
SURFACE TREATMENTCADMIUM OVERALL
INTERNAL DRIVE STYLESLOT
SUBSTITUTES & CROSS-REFERENCES 3
3B44209B01Reference document
Same NSN cross-reference
Reference document — Secondary reference
511406Reference document
Same NSN cross-reference
Reference document — Replaced / superseded reference
15752248-001Reference document
Same NSN cross-reference
Reference document — Replaced / superseded reference
LIFECYCLE
NSN statusCancelled· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 2099?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 2099?
2099 is a FILTER,RADIO FREQUENCY INTERFERE manufactured by Hama. It is classified as a MRO (MRO_GENERAL).
What parts can replace 2099?
There are 3 known substitutes for 2099: 3B44209B01, 511406, 15752248-001. Substitute compatibility should be verified for your specific system.
What is the NSN for 2099?
2099 is cataloged in the U.S. Government catalog under NSN 5305-00-026-2597. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 2099

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.