PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 2095544
2095544 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The SEAL,PLAIN ENCASED is a the manufacturer industrial component. Key specifications include material: RUBBER SYNTHETIC AND LEATHER SEALING ELEMENT, case_style: SQUARE, seal_width: 0.735 INCHES MINIMUM AND 0.765 INCHES MAXIMUM IN, outside_diameter: 2.066 INCHES NOMINAL IN, special_features: FLANGE ON OUTER CASING, surface_treatment: PLASTIC CASE. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-297-6253, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
2095544
NSN: 5330-00-297-6253
FSC: 5330
CAGE: 24617 — GENERAL MOTORS CORP (USA)
SPECIFICATIONS
materialRUBBER SYNTHETIC AND LEATHER SEALING ELEMENT
case_styleSQUARE
seal_width0.735 INCHES MINIMUM AND 0.765 INCHES MAXIMUM IN
outside_diameter2.066 INCHES NOMINAL IN
special_featuresFLANGE ON OUTER CASING
surface_treatmentPLASTIC CASE
housing_bore_diameter5.7435 INCHES MINIMUM AND 5.7465 INCHES MAXIMUM IN
sealing_element_styleANGULAR
accommodated_shaft_diameter2.438 INCHES NOMINAL IN
nondefinitive_spec/std_data1 2 OR 3 CLASS
NSN5330-00-297-6253
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 2095544 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
ACCOMMODATED SHAFT DIAMETER: 2.438 INCHES NOMINAL IN
•
MATERIAL: STEEL CASE
•
OUTSIDE DIAMETER: 2.066 INCHES NOMINAL IN
•
CASE STYLE: SQUARE
•
SEALING ELEMENT STYLE: ANGULAR
•
HOUSING BORE DIAMETER: 5.7435 INCHES MINIMUM AND 5.7465 INCHES MAXIMUM IN
•
SEAL WIDTH: 0.735 INCHES MINIMUM AND 0.765 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS (FLIS)
SPECIAL FEATURESFLANGE ON OUTER CASING
ACCOMMODATED SHAFT DIAMETER2.438 INCHES NOMINAL IN
MATERIALSTEEL CASE
OUTSIDE DIAMETER2.066 INCHES NOMINAL IN
CASE STYLESQUARE
SEALING ELEMENT STYLEANGULAR
HOUSING BORE DIAMETER5.7435 INCHES MINIMUM AND 5.7465 INCHES MAXIMUM IN
SEAL WIDTH0.735 INCHES MINIMUM AND 0.765 INCHES MAXIMUM IN
NONDEFINITIVE SPEC/STD DATA1 2 OR 3 CLASS
SURFACE TREATMENTPLASTIC CASE
VERIFIED SUBSTITUTES & CROSS-REFERENCES 23
SA-1734/UInterchangeable
interchangeable cross-reference
interchangeable
145518-1Interchangeable
interchangeable cross-reference
interchangeable
12530Interchangeable
interchangeable cross-reference
interchangeable
MILE1-183Interchangeable
interchangeable cross-reference
interchangeable
5906Interchangeable
interchangeable cross-reference
interchangeable
5906MInterchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 2095544?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 2095544?
2095544 is a SEAL,PLAIN ENCASED.
What parts can replace 2095544?
There are 23 known substitutes for 2095544: SA-1734/U, 145518-1, 12530 and 20 more. Substitute compatibility should be verified for your specific system.
Is 2095544 still available?
2095544 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 2095544

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026