PartsTable
Technical Data Sheet
Download PDF

209.925 — CONE AND ROLLERS,TAPERED ROLLER

✓ Government record, cited
— · TAPERED BEARING
PRODUCT OVERVIEW

209.925: CONE AND ROLLERS,TAPERED ROLLER.

CONE AND ROLLERS,TAPERED ROLLER. Key specifications include material: STEEL CORROSION RESISTING OVERALL, thread_length: 32.0 MILLIMETERS MM, special_features: 7.3MM CANNULATED; 125MM LONG MM, outside_thread_diameter: 7.3 MILLIMETERS NOMINAL MM, thread_pitch_in_millimeters: 2.75, part_name_assigned_by_controlling_agency: SCREW BONE CRS 7.3MM O/S THREAD DIA CANNULATED 125MM LG MM. This part is cataloged in the U.S.

Government catalog under NSN 3110-00-100-3705, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
209.925
NSN: 3110-00-100-3705
NIINs: 001003705, 006564296, 009210943, 014619073
FSC: 3110 — Bearings, Antifriction, Unmounted
CAGE: 25681 — ITT GOULDS PUMPS, INC. (USA)
SPECIFICATIONS
materialSTEEL CORROSION RESISTING OVERALL
thread_length32.0 MILLIMETERS MM
special_features7.3MM CANNULATED; 125MM LONG MM
outside_thread_diameter7.3 MILLIMETERS NOMINAL MM
thread_pitch_in_millimeters2.75
part_name_assigned_by_controlling_agencySCREW BONE CRS 7.3MM O/S THREAD DIA CANNULATED 125MM LG MM
NSN3110-00-100-3705
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: 209.925 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
STYLE DESIGNATOR: NORMAL ANGLE
•
CONE CORNER RADIUS: 0.8480 INCHES NOMINAL IN
•
CONE WIDTH: 0.8480 INCHES NOMINAL IN
•
STANDARD TOLERANCE DESIGNATION: AFBMA CLASS 2
•
BORE DIAMETER: 0.7500 INCHES NOMINAL IN
•
MATERIAL: STEEL OVERALL
TYPICAL APPLICATIONS
  • Long-term data archival and compliance retention
  • Offsite backup and disaster recovery
  • Air-gapped ransomware protection
  • Cold storage tier for infrequently accessed data
TECHNICAL CHARACTERISTICS
STYLE DESIGNATORNORMAL ANGLE
CONE CORNER RADIUS0.8480 INCHES NOMINAL IN
CONE WIDTH0.8480 INCHES NOMINAL IN
SPECIAL FEATURES0.0620 IN. BY 45 DEG CHAMFER BACK-FACE CORNER RADIUS IN
STANDARD TOLERANCE DESIGNATIONAFBMA CLASS 2
BORE DIAMETER0.7500 INCHES NOMINAL IN
MATERIALSTEEL OVERALL
SUBSTITUTES & CROSS-REFERENCES 9
T09074Reference document
Same NSN cross-reference
Reference document — Secondary reference
9A09074Reference document
Same NSN cross-reference
Reference document — Secondary reference
2953AReference document
Same NSN cross-reference
Reference document — Secondary reference
09074Reference document
Same NSN cross-reference
Reference document — Secondary reference
9211Reference document
Same NSN cross-reference
Reference document — Secondary reference
A1216Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusCancelled· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy 209.925?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 209.925?
209.925 is a CONE AND ROLLERS,TAPERED ROLLER.
What parts can replace 209.925?
There are 9 known substitutes for 209.925: T09074, 9A09074, 2953A and 6 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 209.925?
209.925 is cataloged in the U.S. Government catalog under NSN 3110-00-100-3705. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 209.925

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.