PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 209-010-449-1
209-010-449-1 ✓ Verified by PartsTable
— · BALL BEARING
WHAT YOU NEED TO KNOW
2RS = sealed for life, ZZ = shielded re-greaseable ABEC grade: higher = tighter tolerance
ABEC-1 standard, ABEC-7+ for precision spindles
PRODUCT OVERVIEW

The BEARING,PLAIN,SELF-ALIGNING is a the manufacturer industrial component. Key specifications include material: PLASTIC POLYTETRAFLUOROETHYLENE RACE LINER, bore_diameter: 0.7495 INCHES MINIMUM AND 0.7500 INCHES MAXIMUM IN, style_designator: WITH INSERT AND/OR LINER, surface_treatment: PASSIVATE OVERALL, inner_member_width: 1.4950 INCHES MINIMUM AND 1.5000 INCHES MAXIMUM IN, outer_member_width: 1.0000 INCHES MINIMUM AND 1.0100 INCHES MAXIMUM IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3120-00-986-6125, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
209-010-449-1
NSN: 3120-00-986-6125
FSC: 3120
CAGE: 97499 — BELL TEXTRON INC (USA)
SPECIFICATIONS
materialPLASTIC POLYTETRAFLUOROETHYLENE RACE LINER
bore_diameter0.7495 INCHES MINIMUM AND 0.7500 INCHES MAXIMUM IN
special_featuresBEARING TO BE COMPATABLE WITH FOLLOWING FLUIDS,MIL-J-5624 GRADE JP4,MIL-L-7808 LUBRICATING OIL,MIL-H-5606 HYDRO OIL,MIL-A-8243 ANTI-ICING FLUID AND TRICHLOROETHYLENE
style_designatorWITH INSERT AND/OR LINER
surface_treatmentPASSIVATE OVERALL
inner_member_width1.4950 INCHES MINIMUM AND 1.5000 INCHES MAXIMUM IN
outer_member_width1.0000 INCHES MINIMUM AND 1.0100 INCHES MAXIMUM IN
outer_member_outside_diameter2.1245 INCHES MINIMUM AND 2.1250 INCHES MAXIMUM IN
material_document_and_classification97499209-010-449 MFR REF ALL MATERIAL RESPONSES OVERALL
surface_treatment_document_and_classification97499209-010-449 MFR REF SINGLE TREATMENT RESPONSE OVERALL
NSN3120-00-986-6125
COMPONENT DIAGRAM
BALL BEARING — SEAL TYPE DETERMINES MAINTENANCE OD: — · BORE: — · WIDTH: — SEAL: Open · PN: 209-010-449-1 · OEM ⚠ VERIFY BEFORE ORDERING ABEC grade: higher = tighter tolerance = higher cost. ABEC-1 is standard, ABEC-7+ for precision spindles. Open, shielded (ZZ), and sealed (2RS) versions have different max RPM ratings ✓ BROKER TIP 2RS = sealed for life (no maintenance). ZZ = shielded, re-greaseable. Open = must lubricate on install. Common interchange: 6205-2RS = 6205-2RSR = 6205-DDU (same bearing, different suffix) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
OUTER MEMBER WIDTH: 1.0000 INCHES MINIMUM AND 1.0100 INCHES MAXIMUM IN
•
OUTER MEMBER OUTSIDE DIAMETER: 2.1245 INCHES MINIMUM AND 2.1250 INCHES MAXIMUM IN
•
MATERIAL: PLASTIC POLYTETRAFLUOROETHYLENE RACE LINER
•
MATERIAL DOCUMENT AND CLASSIFICATION: 97499209-010-449 MFR REF ALL MATERIAL RESPONSES OVERALL
•
SURFACE TREATMENT: PASSIVATE OVERALL
TECHNICAL CHARACTERISTICS (FLIS)
OUTER MEMBER WIDTH1.0000 INCHES MINIMUM AND 1.0100 INCHES MAXIMUM IN
OUTER MEMBER OUTSIDE DIAMETER2.1245 INCHES MINIMUM AND 2.1250 INCHES MAXIMUM IN
SPECIAL FEATURESBEARING TO BE COMPATABLE WITH FOLLOWING FLUIDS,MIL-J-5624 GRADE JP4,MIL-L-7808 LUBRICATING OIL,MIL-H-5606 HYDRO OIL,MIL-A-8243 ANTI-ICING FLUID AND TRICHLOROETHYLENE
MATERIALPLASTIC POLYTETRAFLUOROETHYLENE RACE LINER
MATERIALSTEEL COMP 440C INNER MEMBER
MATERIAL DOCUMENT AND CLASSIFICATION97499209-010-449 MFR REF ALL MATERIAL RESPONSES OVERALL
MATERIALSTEEL COMP 416 OUTER RACE MEMBER
SURFACE TREATMENTPASSIVATE OVERALL
INNER MEMBER WIDTH1.4950 INCHES MINIMUM AND 1.5000 INCHES MAXIMUM IN
BORE DIAMETER0.7495 INCHES MINIMUM AND 0.7500 INCHES MAXIMUM IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 7
7651-1Interchangeable
interchangeable cross-reference
interchangeable
CP735Interchangeable
interchangeable cross-reference
interchangeable
127C2Interchangeable
interchangeable cross-reference
interchangeable
96809Interchangeable
interchangeable cross-reference
interchangeable
2AN484Interchangeable
interchangeable cross-reference
interchangeable
ATSB12-4DHSInterchangeable
Same NIIN cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 209-010-449-1?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 209-010-449-1?
209-010-449-1 is a BEARING,PLAIN,SELF-ALIGNING.
What parts can replace 209-010-449-1?
There are 7 known substitutes for 209-010-449-1: 7651-1, CP735, 127C2 and 4 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 209-010-449-1?
209-010-449-1 is cataloged in the Federal Logistics Information System (FLIS) under NSN 3120-00-986-6125. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 209-010-449-1

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026