PartsTable
Technical Data Sheet
Download PDF

2088880-8 — CLAMP,LOOP

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

2088880-8: CLAMP,LOOP.

The CLAMP,LOOP is a the manufacturer industrial component. Key specifications include diameter: 0.194 INCHES MINIMUM AND 0.204 INCHES MAXIMUM IN, material: ALUMINUM BAND, lug_width: 1.000 INCHES NOMINAL IN, overall_width: 0.688 INCHES NOMINAL IN, style_designator: LEFT HAND CLAMP & BRACKET, tongue_hole_type: ROUND, UNTHREADED. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-288-4582, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
2088880-8
NSN: 5340-01-288-4582
FSC: 5340 — Hardware, Commercial
CAGE: 27914 — HONEYWELL INTERNATIONAL INC DBA HONEYWELL (USA)
SPECIFICATIONS
diameter0.194 INCHES MINIMUM AND 0.204 INCHES MAXIMUM IN
materialALUMINUM BAND
lug_width1.000 INCHES NOMINAL IN
overall_width0.688 INCHES NOMINAL IN
style_designatorLEFT HAND CLAMP & BRACKET
tongue_hole_typeROUND, UNTHREADED
lug_hole_diameter0.194 INCHES MINIMUM AND 0.204 INCHES MAXIMUM IN
material_thickness0.035 INCHES MINIMUM AND 0.045 INCHES MAXIMUM IN
loop_inside_diameter0.375 INCHES NOMINAL IN
distance_from_loop_center_to_tongue_end0.859 INCHES NOMINAL IN
center_to_center_distance_between_loop_and_lug_hole0.625 INCHES NOMINAL IN
center_to_center_distance_between_first_and_second_holes0.495 INCHES MINIMUM AND 0.505 INCHES MAXIMUM IN
NSN5340-01-288-4582
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 2088880-8 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
LUG HOLE DIAMETER: 0.194 INCHES MINIMUM AND 0.204 INCHES MAXIMUM IN
•
CENTER TO CENTER DISTANCE BETWEEN LOOP AND LUG HOLE: 0.625 INCHES NOMINAL IN
•
STYLE DESIGNATOR: LEFT HAND CLAMP & BRACKET
•
DIAMETER: 0.194 INCHES MINIMUM AND 0.204 INCHES MAXIMUM IN
•
MATERIAL THICKNESS: 0.035 INCHES MINIMUM AND 0.045 INCHES MAXIMUM IN
•
LUG WIDTH: 1.000 INCHES NOMINAL IN
•
DISTANCE FROM LOOP CENTER TO TONGUE END: 0.859 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
LUG HOLE DIAMETER0.194 INCHES MINIMUM AND 0.204 INCHES MAXIMUM IN
CENTER TO CENTER DISTANCE BETWEEN LOOP AND LUG HOLE0.625 INCHES NOMINAL IN
STYLE DESIGNATORLEFT HAND CLAMP & BRACKET
DIAMETER0.194 INCHES MINIMUM AND 0.204 INCHES MAXIMUM IN
OVERALL WIDTH0.688 INCHES NOMINAL IN
MATERIAL THICKNESS0.035 INCHES MINIMUM AND 0.045 INCHES MAXIMUM IN
LUG WIDTH1.000 INCHES NOMINAL IN
DISTANCE FROM LOOP CENTER TO TONGUE END0.859 INCHES NOMINAL IN
CENTER TO CENTER DISTANCE BETWEEN FIRST AND SECOND HOLES0.495 INCHES MINIMUM AND 0.505 INCHES MAXIMUM IN
TONGUE HOLE TYPEROUND, UNTHREADED
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 2088880-8?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 2088880-8?
2088880-8 is a CLAMP,LOOP.
What is the NSN for 2088880-8?
2088880-8 is cataloged in the U.S. Government catalog under NSN 5340-01-288-4582. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 2088880-8

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.