PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 208-3-25
208-3-25 ✓ Verified by PartsTable
— · PIPE SECTION
WHAT YOU NEED TO KNOW
Schedule = wall thickness, NOT diameter Nominal pipe size != actual OD
Sch 40 and Sch 80 same OD, different wall
PRODUCT OVERVIEW

The STRAINER ELEMENT,SEDIMENT is a the manufacturer industrial component. Key specifications include material: COPPER ALLOY, mesh_size: 120.0, thickness: 0.120 INCHES NOMINAL IN, wire_diameter: 0.00370 INCHES NOMINAL IN, special_features: 120.0 BY 108.0 OFF COUNT MESH, style_designator: ROUND (BASICALLY FLAT). This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 4720-00-005-5009, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
208-3-25
NSN: 4720-00-005-5009
FSC: 4720
CAGE: 98441 — PARKER HANNIFIN CORP DBA PNEUTRONICS DIV STRATOFLEX PRODUCTS DIVISION (USA)
SPECIFICATIONS
materialCOPPER ALLOY
mesh_size120.0
thickness0.120 INCHES NOMINAL IN
wire_diameter0.00370 INCHES NOMINAL IN
special_features120.0 BY 108.0 OFF COUNT MESH
style_designatorROUND (BASICALLY FLAT)
filtering_media_designMESH
element_outside_diameter1.807 INCHES MINIMUM AND 1.812 INCHES MAXIMUM IN
NSN4720-00-005-5009
COMPONENT DIAGRAM
PIPE SECTION — SCHEDULE = WALL THICKNESS WALL: — OD: — LENGTH: — — — PN: 208-3-25 · OEM ⚠ VERIFY BEFORE ORDERING Schedule = wall thickness, NOT pipe diameter. Sch 40 and Sch 80 have the same OD but different wall thickness. Nominal pipe size ≠ actual OD — a 1" pipe is actually 1.315" OD ✓ BROKER TIP Sch 40 = standard wall, Sch 80 = heavy wall (higher pressure), Sch 160 = extra heavy. Seamless pipe is required for high-pressure applications — welded pipe has lower ratings PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
EXTERIOR COLOR: BLACK
•
OUTSIDE DIAMETER: 0.469 INCHES NOMINAL IN
•
MINIMUM INSIDE BENDING RADIUS: 2.000 INCHES IN
•
MEASURING METHOD AND LENGTH: 25.000 INCHES NOMINAL OVERALL IN
•
SPECIFICATION/STANDARD DATA: 81349-MIL-H-13444 GOVERNMENT SPECIFICATION
•
NONDEFINITIVE SPEC/STD DATA: 1 TYPE
•
VACUUM IN TORR: 254.0
•
OPERATING PRESSURE: 500.0 POUNDS PER SQUARE INCH (PSI) MAXIMUM SINGLE RESPONSE LBS
TECHNICAL CHARACTERISTICS (FLIS)
EXTERIOR COLORBLACK
OUTSIDE DIAMETER0.469 INCHES NOMINAL IN
MINIMUM INSIDE BENDING RADIUS2.000 INCHES IN
MEASURING METHOD AND LENGTH25.000 INCHES NOMINAL OVERALL IN
SPECIFICATION/STANDARD DATA81349-MIL-H-13444 GOVERNMENT SPECIFICATION
NONDEFINITIVE SPEC/STD DATA1 TYPE
VACUUM IN TORR254.0
OPERATING PRESSURE500.0 POUNDS PER SQUARE INCH (PSI) MAXIMUM SINGLE RESPONSE LBS
HYDROSTATIC TEST PRESSURE1000.0 POUNDS PER SQUARE INCH SINGLE RESPONSE LBS
OUTER COVERING ENVIRONMENTAL PROTECTIONOIL RESISTANT AND GREASE RESISTANT AND ABRASION RESISTANT AND OZONE RESISTANT
VERIFIED SUBSTITUTES & CROSS-REFERENCES 10
33528GInterchangeable
interchangeable cross-reference
interchangeable
208-325Interchangeable
interchangeable cross-reference
interchangeable
10092840Interchangeable
interchangeable cross-reference
interchangeable
A10325Interchangeable
interchangeable cross-reference
interchangeable
3662003420Interchangeable
interchangeable cross-reference
interchangeable
FT7052Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 208-3-25?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 208-3-25?
208-3-25 is a STRAINER ELEMENT,SEDIMENT.
What parts can replace 208-3-25?
There are 10 known substitutes for 208-3-25: 33528G, 208-325, 10092840 and 7 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 208-3-25?
208-3-25 is cataloged in the Federal Logistics Information System (FLIS) under NSN 4720-00-005-5009. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 208-3-25

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026