PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 208-15
208-15 ✓ Verified by PartsTable
Clementoni · BOLT SCREW
WHAT YOU NEED TO KNOW
Grade/class stamped on head determines strength Metric and imperial threads look similar — measure pitch
Verify thread pitch — metric != imperial
PRODUCT OVERVIEW

Greedy loves to eat! He likes cakes most of all. He simply can't resist them and usually eats them all by himself immediately after he makes one. But the Smurfs can't be mad at him because he bakes so many of them that every Smurf can enjoy his homemade delicacies.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5307-00-248-7481, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
208-15
NSN: 5307-00-248-7481
FSC: 5307
CAGE: 7CNG1 — FDH DEFENSE AFTERMARKET, LLC (USA)
SPECIFICATIONS
end_item_identificationPACER DAWN
NSN5307-00-248-7481
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: 208-15 · Clementoni ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
THREAD LENGTH: 0.469 INCHES MINIMUM STUD THREAD IN
•
THREAD CLASS: 5A STUD THREAD A
•
THREAD SERIES DESIGNATOR: UNIFIED NATIONAL COARSE (UNC) STUD THREAD
•
THREAD DIRECTION: RIGHT-HAND NUT THREAD
•
NOMINAL THREAD SIZE: 0.312 INCHES STUD THREAD IN
TECHNICAL CHARACTERISTICS (FLIS)
THREAD LENGTH0.469 INCHES MINIMUM STUD THREAD IN
THREAD CLASS5A STUD THREAD A
THREAD LENGTH0.875 INCHES MINIMUM NUT THREAD IN
THREAD SERIES DESIGNATORUNIFIED NATIONAL COARSE (UNC) STUD THREAD
THREAD CLASS3A NUT THREAD A
THREAD DIRECTIONRIGHT-HAND NUT THREAD
THREAD SERIES DESIGNATORUNIFIED NATIONAL COARSE (UNC) NUT THREAD
NOMINAL THREAD SIZE0.312 INCHES STUD THREAD IN
NOMINAL THREAD SIZE0.312 INCHES NUT THREAD IN
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-N-281,CL A FED SPEC SINGLE MATERIAL RESPONSE
VERIFIED SUBSTITUTES & CROSS-REFERENCES 8
173S1Interchangeable
interchangeable cross-reference
interchangeable
459-9Interchangeable
interchangeable cross-reference
interchangeable
33949Interchangeable
interchangeable cross-reference
interchangeable
46685Interchangeable
interchangeable cross-reference
interchangeable
550 15Interchangeable
interchangeable cross-reference
interchangeable
D-3630Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 208-15?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 208-15?
208-15 is a PISTON,LINEAR ACTUATING CYLINDER manufactured by Clementoni.
What parts can replace 208-15?
There are 8 known substitutes for 208-15: 173S1, 459-9, 33949 and 5 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 208-15?
208-15 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5307-00-248-7481. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 208-15

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026