PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 207PPL6
207PPL6 ✓ Verified by PartsTable
— · TAPERED BEARING
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

The BEARING,BALL,ANNULAR is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, bore_shape: STRAIGHT, bore_diameter: 35.00 MILLIMETERS NOMINAL MM, overall_width: 17.0 MILLIMETERS NOMINAL MM, load_direction: RADIAL, surface_finish: GROUND. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-293-8476, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
207PPL6
NSN: 3110-00-293-8476
FSC: 3110
CAGE: 43991 — FAG BEARINGS CORPORATION (USA)
SPECIFICATIONS
materialSTEEL OVERALL
bore_shapeSTRAIGHT
bore_diameter35.00 MILLIMETERS NOMINAL MM
overall_width17.0 MILLIMETERS NOMINAL MM
load_directionRADIAL
surface_finishGROUND
shield_quantity2
style_designatorNON-LOADING GROOVE, NON-SEPARABLE
lubrication_materialOIL
overall_outside_diameter72.00 MILLIMETERS NOMINAL MM
internal_fit-up_designationSTANDARD
retainer_fabrication_methodPRESSED
NSN3110-00-293-8476
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: 207PPL6 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
OVERALL OUTSIDE DIAMETER: 72.00 MILLIMETERS NOMINAL MM
•
LUBRICATION MATERIAL: OIL
•
SURFACE FINISH: GROUND
•
STANDARD TOLERANCE DESIGNATION: ABEC NO.1
•
INTERNAL FIT-UP DESIGNATION: STANDARD
•
SHIELD QUANTITY: 2
•
RETAINER FABRICATION METHOD: PRESSED
•
LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATION: MIL-L-7870 MIL SPEC SINGLE MATERIAL RESPONSE
TECHNICAL CHARACTERISTICS (FLIS)
OVERALL OUTSIDE DIAMETER72.00 MILLIMETERS NOMINAL MM
LUBRICATION MATERIALOIL
SURFACE FINISHGROUND
STANDARD TOLERANCE DESIGNATIONABEC NO.1
INTERNAL FIT-UP DESIGNATIONSTANDARD
SHIELD QUANTITY2
RETAINER FABRICATION METHODPRESSED
LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATIONMIL-L-7870 MIL SPEC SINGLE MATERIAL RESPONSE
LOAD DIRECTIONRADIAL
BORE SHAPESTRAIGHT
VERIFIED SUBSTITUTES & CROSS-REFERENCES 30
216-SFFInterchangeable
interchangeable cross-reference
interchangeable
77516Interchangeable
interchangeable cross-reference
interchangeable
FFB171/04J16C2BInterchangeable
interchangeable cross-reference
interchangeable
72-6970-574Interchangeable
interchangeable cross-reference
interchangeable
22220CJW33Interchangeable
interchangeable cross-reference
interchangeable
RS22220Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 207PPL6?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 207PPL6?
207PPL6 is a BEARING,BALL,ANNULAR.
What parts can replace 207PPL6?
There are 30 known substitutes for 207PPL6: 216-SFF, 77516, FFB171/04J16C2B and 27 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 207PPL6?
207PPL6 is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-293-8476. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 207PPL6

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026