PartsTable
Technical Data Sheet
Download PDF

207MBG1 — BEARING,BALL,STEERING SHAFT

✓ Government record, cited
— · TAPERED BEARING
PRODUCT OVERVIEW

207MBG1: BEARING,BALL,STEERING SHAFT.

The BEARING,BALL,STEERING SHAFT is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, bore_diameter: 0.0988 INCHES NOMINAL IN, overall_length: 1.0630 INCHES NOMINAL IN, special_features: W/SNAP RING RETAINMENT WASHER AND FELT PACKING ON OD OF INNER RING, style_designator: STEERING SHAFT, flange_outside_diameter: 1.7400 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 3110-00-227-4838, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
207MBG1
NSN: 3110-00-227-4838
FSC: 3110 — Bearings, Antifriction, Unmounted
CAGE: 05415 — LINDE LIFT TRUCK CORP. (USA)
SPECIFICATIONS
materialSTEEL OVERALL
bore_diameter0.0988 INCHES NOMINAL IN
overall_length1.0630 INCHES NOMINAL IN
special_featuresW/SNAP RING RETAINMENT WASHER AND FELT PACKING ON OD OF INNER RING
style_designatorSTEERING SHAFT
flange_outside_diameter1.7400 INCHES NOMINAL IN
NSN3110-00-227-4838
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: 207MBG1 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
FLANGE OUTSIDE DIAMETER: 1.7400 INCHES NOMINAL IN
•
STYLE DESIGNATOR: STEERING SHAFT
•
BORE DIAMETER: 0.0988 INCHES NOMINAL IN
•
MATERIAL: STEEL OVERALL
TECHNICAL CHARACTERISTICS
FLANGE OUTSIDE DIAMETER1.7400 INCHES NOMINAL IN
STYLE DESIGNATORSTEERING SHAFT
OVERALL LENGTH1.0630 INCHES NOMINAL IN
SPECIAL FEATURESW/SNAP RING RETAINMENT WASHER AND FELT PACKING ON OD OF INNER RING
BORE DIAMETER0.0988 INCHES NOMINAL IN
MATERIALSTEEL OVERALL
SUBSTITUTES & CROSS-REFERENCES 5
262288Reference document
Same NSN cross-reference
Reference document — Secondary reference
0BX262288Reference document
Same NSN cross-reference
Reference document — Secondary reference
3920P11Reference document
Same NSN cross-reference
Reference document — Secondary reference
504GK819Reference document
Same NSN cross-reference
Reference document — Secondary reference
449271Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusCancelled· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 207MBG1?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 207MBG1?
207MBG1 is a BEARING,BALL,STEERING SHAFT.
What parts can replace 207MBG1?
There are 5 known substitutes for 207MBG1: 262288, 0BX262288, 3920P11 and 2 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 207MBG1?
207MBG1 is cataloged in the U.S. Government catalog under NSN 3110-00-227-4838. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 207MBG1

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.