207H5DTM — BEARING,BALL,DUPLEX

✓ Government record, cited

— · TAPERED BEARING

PRODUCT OVERVIEW

207H5DTM: BEARING,BALL,DUPLEX.

The BEARING,BALL,DUPLEX is a the manufacturer industrial component. Key specifications include material: STEEL INNER RING, bore_diameter: 35.00 MILLIMETERS NOMINAL MM, overall_width: 34.0 MILLIMETERS NOMINAL MM, load_direction: ANGULAR, surface_finish: GROUND, special_features: 25 DEGREES OR LESS ANGULARITY. This part is cataloged in the U.S.

Government catalog under NSN 3110-00-151-4822, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS

207H5DTM

NSN: 3110-00-151-4822
FSC: 3110 — Bearings, Antifriction, Unmounted
CAGE: 70854 — SCHAEFFLER AEROSPACE USA CORP DIV SCHAEFFLER AEROSPACE USA CORPORATION (USA)

SPECIFICATIONS

material	STEEL INNER RING
bore_diameter	35.00 MILLIMETERS NOMINAL MM
overall_width	34.0 MILLIMETERS NOMINAL MM
load_direction	ANGULAR
surface_finish	GROUND
special_features	25 DEGREES OR LESS ANGULARITY
style_designator	COUNTERBORED OUTER RINGS, NON-SEPARABLE, TANDEM MOUNTING
internal_clearance	0.0007 INCHES MINIMUM RADIAL AND 0.0012 INCHES MAXIMUM RADIAL IN
bearing_preload_rating	80.0 POUNDS NOMINAL LBS
overall_outside_diameter	72.00 MILLIMETERS NOMINAL MM
standard_tolerance_designation	ABEC NO.7
NSN	3110-00-151-4822

COMPONENT DIAGRAM

KEY FEATURES

•

BEARING PRELOAD RATING: 80.0 POUNDS NOMINAL LBS

•

INTERNAL CLEARANCE: 0.0007 INCHES MINIMUM RADIAL AND 0.0012 INCHES MAXIMUM RADIAL IN

•

SURFACE FINISH: GROUND

•

STYLE DESIGNATOR: COUNTERBORED OUTER RINGS, NON-SEPARABLE, TANDEM MOUNTING

•

OVERALL OUTSIDE DIAMETER: 72.00 MILLIMETERS NOMINAL MM

•

LOAD DIRECTION: ANGULAR

TECHNICAL CHARACTERISTICS

BEARING PRELOAD RATING	80.0 POUNDS NOMINAL LBS
INTERNAL CLEARANCE	0.0007 INCHES MINIMUM RADIAL AND 0.0012 INCHES MAXIMUM RADIAL IN
SURFACE FINISH	GROUND
STYLE DESIGNATOR	COUNTERBORED OUTER RINGS, NON-SEPARABLE, TANDEM MOUNTING
OVERALL WIDTH	34.0 MILLIMETERS NOMINAL MM
OVERALL OUTSIDE DIAMETER	72.00 MILLIMETERS NOMINAL MM
LOAD DIRECTION	ANGULAR
SPECIAL FEATURES	25 DEGREES OR LESS ANGULARITY
STANDARD TOLERANCE DESIGNATION	ABEC NO.7
BORE DIAMETER	35.00 MILLIMETERS NOMINAL MM

OTHER ITEMS IN FSC 3110 — Bearings, Antifriction, Unmounted

Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.

3110-00-001-1937 3110-00-001-1938 3110-00-001-4661 3110-00-001-4662 3110-00-001-4689 3110-00-001-4722

SUBSTITUTES & CROSS-REFERENCES 2

207H5DMDUPLEXReference document

Same NSN cross-reference

Reference document — Advisory reference — outside the item-of-supply concept

403314Same NSN cross-reference

Same NSN cross-reference

Also cataloged under this NSN

LIFECYCLE

NSN statusActive· U.S. Government catalog

Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required

Ready to buy 207H5DTM?

Compare prices from verified sellers on eBay

Buy on eBay →

As an eBay Partner, PartsTable may earn a commission. Your price is not affected.

FREQUENTLY ASKED QUESTIONS

What is 207H5DTM?

207H5DTM is a BEARING,BALL,DUPLEX.

What parts can replace 207H5DTM?

There are 2 known substitutes for 207H5DTM: 207H5DMDUPLEX, 403314. Substitute compatibility should be verified for your specific system.

What is the NSN for 207H5DTM?

207H5DTM is cataloged in the U.S. Government catalog under NSN 3110-00-151-4822. This indicates validated use in U.S. government and defense supply chains.

Community Feedback

207H5DTM — BEARING,BALL,DUPLEX

Request a Quote — 207H5DTM