PartsTable
Technical Data Sheet
Download PDF

2074608-3407 — SCREW,MACHINE

✓ Government record, cited
— · BOLT SCREW
PRODUCT OVERVIEW

2074608-3407: SCREW,MACHINE.

The SCREW,MACHINE is a the manufacturer industrial component. Key specifications include head_style: PAN NO. 2, head_height: 0.058 INCHES MINIMUM AND 0.068 INCHES MAXIMUM IN, thread_class: 2A A, head_diameter: 0.205 INCHES MINIMUM AND 0.219 INCHES MAXIMUM IN, thread_length: 0.418 INCHES MINIMUM AND 0.500 INCHES MAXIMUM IN, fastener_length: 0.468 INCHES MINIMUM AND 0.500 INCHES MAXIMUM IN.

This part is cataloged in the U.S. Government catalog under NSN 5305-00-146-2871, indicating validated use in U.S. government and defense logistics supply chains.

Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
2074608-3407
NSN: 5305-00-146-2871
NIINs: 001462871, 010645433
FSC: 5305 — Screws
CAGE: 24384 — SYPRIS ELECTRONICS, LLC DBA SYPRIS ELECTRONICS LLC (USA)
SPECIFICATIONS
head_stylePAN NO. 2
head_height0.058 INCHES MINIMUM AND 0.068 INCHES MAXIMUM IN
thread_class2A A
head_diameter0.205 INCHES MINIMUM AND 0.219 INCHES MAXIMUM IN
thread_length0.418 INCHES MINIMUM AND 0.500 INCHES MAXIMUM IN
fastener_length0.468 INCHES MINIMUM AND 0.500 INCHES MAXIMUM IN
thread_directionRIGHT-HAND
internal_drive_styleSLOT
nominal_thread_diameter0.112 INCHES IN
screw_surface_treatmentPASSIVATE
minimum_tensile_strength80000 POUNDS PER SQUARE INCH LBS
thread_quantity_per_inch40
NSN5305-00-146-2871
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: 2074608-3407 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
HEAD HEIGHT: 0.058 INCHES MINIMUM AND 0.068 INCHES MAXIMUM IN
•
SCREW SURFACE TREATMENT: PASSIVATE
•
FASTENER LENGTH: 0.469 INCHES MINIMUM AND 0.500 INCHES MAXIMUM IN
•
SCREW MATERIAL DOCUMENT AND CLASSIFICATION: QQ-S-763 FED SPEC SINGLE MATERIAL RESPONSE
•
THREAD LENGTH: 0.419 INCHES MINIMUM AND 0.500 INCHES MAXIMUM IN
•
NOMINAL THREAD DIAMETER: 0.112 INCHES IN
•
HEAD STYLE: PAN NO. 2
•
THREAD DIRECTION: RIGHT-HAND
TECHNICAL CHARACTERISTICS
HEAD HEIGHT0.058 INCHES MINIMUM AND 0.068 INCHES MAXIMUM IN
SCREW SURFACE TREATMENTPASSIVATE
FASTENER LENGTH0.469 INCHES MINIMUM AND 0.500 INCHES MAXIMUM IN
SCREW MATERIAL DOCUMENT AND CLASSIFICATIONQQ-S-763 FED SPEC SINGLE MATERIAL RESPONSE
THREAD LENGTH0.419 INCHES MINIMUM AND 0.500 INCHES MAXIMUM IN
NOMINAL THREAD DIAMETER0.112 INCHES IN
HEAD STYLEPAN NO. 2
THREAD DIRECTIONRIGHT-HAND
SCREW MATERIALSTEEL CORROSION RESISTING
INTERNAL DRIVE STYLESLOT
SUBSTITUTES & CROSS-REFERENCES 1
8599273Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 2074608-3407?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 2074608-3407?
2074608-3407 is a SCREW,MACHINE.
What parts can replace 2074608-3407?
There is 1 known substitute for 2074608-3407: 8599273. Substitute compatibility should be verified for your specific system.
What is the NSN for 2074608-3407?
2074608-3407 is cataloged in the U.S. Government catalog under NSN 5305-00-146-2871. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 2074608-3407

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.