PartsTable
Technical Data Sheet
Download PDF

20732 — HANGER,SPRING,VEHICLE

✓ Government record, cited
schleich · TAPERED BEARING
PRODUCT OVERVIEW

20732: HANGER,SPRING,VEHICLE.

To mark the new Smurf film coming out in summer 2011, Papa Smurf from the 3D film is also available as a Schleich figure. Key specifications include physical_form: LIQUID, special_features: FORMALDEHYDE-FREE HOLDING TANK DEODORANT, supplementary_features: 32 OZ BOTTLE OZ. This part is cataloged in the U.S.

Government catalog under NSN 3110-00-156-5219, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
20732
NSN: 3110-00-156-5219
NIINs: 001565219, 007591682, 010718599, 012444431, 013937043, 017078699
FSC: 3110 — Bearings, Antifriction, Unmounted
CAGE: 61038 — VICKERS INC (USA)
SPECIFICATIONS
physical_formLIQUID
special_featuresFORMALDEHYDE-FREE HOLDING TANK DEODORANT
supplementary_features32 OZ BOTTLE OZ
NSN3110-00-156-5219
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: 20732 · schleich ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
RETAINER FABRICATION METHOD: MACHINED
•
INTERNAL FIT-UP DESIGNATION: STANDARD
•
SURFACE FINISH: GROUND
•
STYLE DESIGNATOR: COUNTERBORED OUTER RING, NON-SEPARABLE
•
OVERALL OUTSIDE DIAMETER: 80.00 MILLIMETERS NOMINAL MM
•
BORE SHAPE: STRAIGHT
•
LOAD DIRECTION: RADIAL
TECHNICAL CHARACTERISTICS
RETAINER FABRICATION METHODMACHINED
INTERNAL FIT-UP DESIGNATIONSTANDARD
SURFACE FINISHGROUND
STYLE DESIGNATORCOUNTERBORED OUTER RING, NON-SEPARABLE
OVERALL WIDTH18.0 MILLIMETERS NOMINAL MM
OVERALL OUTSIDE DIAMETER80.00 MILLIMETERS NOMINAL MM
BORE SHAPESTRAIGHT
LOAD DIRECTIONRADIAL
STANDARD TOLERANCE DESIGNATIONABEC NO.1
BORE DIAMETER40.00 MILLIMETERS NOMINAL MM
SUBSTITUTES & CROSS-REFERENCES 3
700452Reference document
Same NSN cross-reference
Reference document — Secondary reference
59178-9Reference document
Same NSN cross-reference
Reference document — Secondary reference
BB517Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 20732?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 20732?
20732 is a HANGER,SPRING,VEHICLE manufactured by schleich.
What parts can replace 20732?
There are 3 known substitutes for 20732: 700452, 59178-9, BB517. Substitute compatibility should be verified for your specific system.
What is the NSN for 20732?
20732 is cataloged in the U.S. Government catalog under NSN 3110-00-156-5219. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 20732

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.