NEMA frame determines mounting bolt pattern TEFC for outdoor, ODP for dry indoor only
C-face vs foot-mount — different mounting
PRODUCT OVERVIEW
<b>Simple and clear</b><br>Not a lot of bells and whistles. This is a docking station with clean lines. Both in design as well as the advanced functionality.
The silver aluminum gives the product a beautiful appearance and contributes efficiently to dissipate the heat.<br><br><b>Two Possibilities</b><br>In the hard disk slot fits 2.5" and 3.5" HDDs or SSDs. Using the USB 3.0 port you could reach transfer rates of up to 5 Gbit/s.<br><br><b>Commissioning made easy</b><br>The hard disk must be simply inserted into the available slot and the USB 3.0 cable have to be connected to the PC. Using a plug and play the hard disk is immediately recognized by the computer.
No driver installation is required! This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 6105-00-021-7462, indicating validated use in U.S. government and defense logistics supply chains.
WHERE IT FITS
MRO→MRO_GENERAL→20705
NSN:6105-00-021-7462 FSC:6105 CAGE:98889 — AEROCONTROLEX GROUP, INC. DIV TALLEY ACTUATORS (USA)
SPECIFICATIONS
phase
SINGLE INPUT
end_type
COMPRESSION RING AND NUT FIRST END
material
STEEL COMP 304
mesh_size
100.0
thickness
0.010 INCHES NOMINAL IN
base_style
FOUR PIN INDEXING
bulb_style
T ("U" SHAPED TUBULAR)
duty_cycle
CONTINUOUS
point_type
CONVENTIONAL
point_angle
118.0 DEGREES NOMINAL
shank_style
STRAIGHT ROUND
flute_length
2.438 INCHES NOMINAL IN
NSN
6105-00-021-7462
COMPONENT DIAGRAM
KEY FEATURES
•
MOUNTING FACILITY TYPE AND QUANTITY: 4 UNTHREADED HOLE(S)
•
TERMINAL TYPE AND QUANTITY: 1 WIRE LEAD
•
FEATURES PROVIDED: HORIZONTAL MOUNTING POSITION AND VERTICAL MOUNTING POSITION
•
SHAFT ROTATION DIRECTION: CLOCKWISE SINGLE END
•
DUTY CYCLE: CONTINUOUS
•
NOMINAL CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO HEIGHT: 1.875 INCHES IN
•
INCLOSURE SPECIFICATION: COMMERCIAL
•
NOMINAL CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO WIDTH: 1.062 INCHES IN
TECHNICAL CHARACTERISTICS (FLIS)
MOUNTING FACILITY TYPE AND QUANTITY
4 UNTHREADED HOLE(S)
TERMINAL TYPE AND QUANTITY
1 WIRE LEAD
FEATURES PROVIDED
HORIZONTAL MOUNTING POSITION AND VERTICAL MOUNTING POSITION
SHAFT ROTATION DIRECTION
CLOCKWISE SINGLE END
DUTY CYCLE
CONTINUOUS
NOMINAL CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO HEIGHT
1.875 INCHES IN
INCLOSURE SPECIFICATION
COMMERCIAL
NOMINAL CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO WIDTH
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 20705?
20705 is a BUSHING,ELECTRICAL CONDUIT manufactured by Exost. It is classified as a MRO (MRO_GENERAL).
What parts can replace 20705?
There are 10 known substitutes for 20705: 1340, MS15444-86, 407 and 7 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 20705?
20705 is cataloged in the Federal Logistics Information System (FLIS) under NSN 6105-00-021-7462. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.