PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 207-120241-05
207-120241-05 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The BUTTON,PLUG is a the manufacturer industrial component. Key specifications include material: PLASTIC, head_height: 0.030 INCHES NOMINAL IN, overall_height: 0.170 INCHES NOMINAL IN, style_designator: STANDARD, head_outside_diameter: 0.340 INCHES NOMINAL IN, prong_outside_diameter: 0.190 INCHES NOMINAL IN. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-753-3608, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
207-120241-05
NSN: 5340-00-753-3608
FSC: 5340
CAGE: 02768 — ILLINOIS TOOL WORKS INC FASTEX DIV (USA)
SPECIFICATIONS
materialPLASTIC
head_height0.030 INCHES NOMINAL IN
overall_height0.170 INCHES NOMINAL IN
prong_quantity4
style_designatorSTANDARD
head_outside_diameter0.340 INCHES NOMINAL IN
prong_outside_diameter0.190 INCHES NOMINAL IN
hole_accommodation_diameter0.180 INCHES NOMINAL IN
material_accommodated_thickness0.070 INCHES NOMINAL IN
NSN5340-00-753-3608
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 207-120241-05 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MATERIAL ACCOMMODATED THICKNESS: 0.070 INCHES NOMINAL IN
•
HEAD HEIGHT: 0.030 INCHES NOMINAL IN
•
PRONG QUANTITY: 4
•
PRONG OUTSIDE DIAMETER: 0.190 INCHES NOMINAL IN
•
MATERIAL: PLASTIC
•
STYLE DESIGNATOR: STANDARD
•
HEAD OUTSIDE DIAMETER: 0.340 INCHES NOMINAL IN
•
HOLE ACCOMMODATION DIAMETER: 0.180 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
MATERIAL ACCOMMODATED THICKNESS0.070 INCHES NOMINAL IN
HEAD HEIGHT0.030 INCHES NOMINAL IN
PRONG QUANTITY4
PRONG OUTSIDE DIAMETER0.190 INCHES NOMINAL IN
MATERIALPLASTIC
STYLE DESIGNATORSTANDARD
HEAD OUTSIDE DIAMETER0.340 INCHES NOMINAL IN
HOLE ACCOMMODATION DIAMETER0.180 INCHES NOMINAL IN
OVERALL HEIGHT0.170 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 23
TU2202-16 W/ZINC PLATINGUpgraded Successor
successor cross-reference
successor
SP2529Upgraded Successor
successor cross-reference
successor
0101Upgraded Successor
successor cross-reference
successor
95-0250Upgraded Successor
successor cross-reference
successor
103091Interchangeable
interchangeable cross-reference
interchangeable
B18.6.3Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 207-120241-05?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 207-120241-05?
207-120241-05 is a BUTTON,PLUG.
What parts can replace 207-120241-05?
There are 23 known substitutes for 207-120241-05: TU2202-16 W/ZINC PLATING, SP2529, 0101 and 20 more. Substitute compatibility should be verified for your specific system.
Is 207-120241-05 still available?
207-120241-05 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 207-120241-05

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026