PartsTable
Technical Data Sheet
Download PDF

207-090201-00-0101 — BUTTON,PLUG

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

207-090201-00-0101: BUTTON,PLUG.

The BUTTON,PLUG is a the manufacturer industrial component. Key specifications include material: PLASTIC, head_height: 0.062 INCHES NOMINAL IN, overall_height: 0.093 INCHES NOMINAL IN, special_features: COLOR NATURAL, style_designator: STANDARD, head_outside_diameter: 0.250 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-072-9342, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
207-090201-00-0101
NSN: 5340-01-072-9342
FSC: 5340 — Hardware, Commercial
CAGE: 02768 — ILLINOIS TOOL WORKS INC FASTEX DIV (USA)
SPECIFICATIONS
materialPLASTIC
head_height0.062 INCHES NOMINAL IN
overall_height0.093 INCHES NOMINAL IN
prong_quantity4
special_featuresCOLOR NATURAL
style_designatorSTANDARD
head_outside_diameter0.250 INCHES NOMINAL IN
prong_outside_diameter0.171 INCHES NOMINAL IN
hole_accommodation_diameter0.140 INCHES NOMINAL IN
material_accommodated_thickness0.031 INCHES MINIMUM AND 0.062 INCHES MAXIMUM IN
NSN5340-01-072-9342
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 207-090201-00-0101 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
HEAD HEIGHT: 0.062 INCHES NOMINAL IN
•
HOLE ACCOMMODATION DIAMETER: 0.140 INCHES NOMINAL IN
•
MATERIAL ACCOMMODATED THICKNESS: 0.031 INCHES MINIMUM AND 0.062 INCHES MAXIMUM IN
•
STYLE DESIGNATOR: STANDARD
•
PRONG OUTSIDE DIAMETER: 0.171 INCHES NOMINAL IN
•
HEAD OUTSIDE DIAMETER: 0.250 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
OVERALL HEIGHT0.093 INCHES NOMINAL IN
HEAD HEIGHT0.062 INCHES NOMINAL IN
HOLE ACCOMMODATION DIAMETER0.140 INCHES NOMINAL IN
MATERIAL ACCOMMODATED THICKNESS0.031 INCHES MINIMUM AND 0.062 INCHES MAXIMUM IN
STYLE DESIGNATORSTANDARD
PRONG OUTSIDE DIAMETER0.171 INCHES NOMINAL IN
SPECIAL FEATURESCOLOR NATURAL
HEAD OUTSIDE DIAMETER0.250 INCHES NOMINAL IN
MATERIALPLASTIC
PRONG QUANTITY4
SUBSTITUTES & CROSS-REFERENCES 5
251-017Reference document
Same NSN cross-reference
Reference document — Secondary reference
31-15-4561-1Reference document
Same NSN cross-reference
Reference document — Vendor item drawing reference
9172Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
207-090201-00-0108Reference document
Same NSN cross-reference
Reference document — Secondary reference
31-15-4561Reference document
Same NSN cross-reference
Reference document — Drawing number reference only
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy 207-090201-00-0101?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 207-090201-00-0101?
207-090201-00-0101 is a BUTTON,PLUG.
What parts can replace 207-090201-00-0101?
There are 5 known substitutes for 207-090201-00-0101: 251-017, 31-15-4561-1, 9172 and 2 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 207-090201-00-0101?
207-090201-00-0101 is cataloged in the U.S. Government catalog under NSN 5340-01-072-9342. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 207-090201-00-0101