PartsTable
Technical Data Sheet
Download PDF

207-000-1 — RESISTOR,FIXED,WIRE WOUND

✓ Government record, cited
APC · ORING SEAL
PRODUCT OVERVIEW

207-000-1: RESISTOR,FIXED,WIRE WOUND.

The RESISTOR,FIXED,WIRE WOUND is a APC industrial component. Key specifications include material: STEEL CORROSION RESISTING, outside_diameter: 12.000 INCHES NOMINAL IN, attachment_method: BOLTED, peripheral_shape_style: CIRCULAR, fluid_filter_element_retainer: NOT INCLUDED. This part is cataloged in the U.S.

Government catalog under NSN 5330-00-496-4104, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
207-000-1
NSN: 5330-00-496-4104
NIINs: 004964104, 005725775, 016254087
FSC: 5330 — Packing and Gasket Materials
CAGE: 80908 — FRINK AMERICA INC (USA)
SPECIFICATIONS
materialSTEEL CORROSION RESISTING
outside_diameter12.000 INCHES NOMINAL IN
attachment_methodBOLTED
peripheral_shape_styleCIRCULAR
bolt_circle_hole_quantity4
fluid_filter_element_retainerNOT INCLUDED
NSN5330-00-496-4104
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 207-000-1 MFR: APC ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
INTERMEDIATE RING QUANTITY: 4
•
OUTSIDE DIAMETER: 4.500 INCHES NOMINAL IN
•
CROSS-SECTIONAL SHAPE STYLE: V TOP RING
•
INSIDE DIAMETER: 3.875 INCHES NOMINAL IN
•
HEIGHT: 1.000 INCHES NOMINAL IN
•
MATERIAL: COTTON INTERMEDIATE RING
TECHNICAL CHARACTERISTICS
INTERMEDIATE RING QUANTITY4
OUTSIDE DIAMETER4.500 INCHES NOMINAL IN
CROSS-SECTIONAL SHAPE STYLEV TOP RING
CROSS-SECTIONAL SHAPE STYLEV BOTTOM RING
CROSS-SECTIONAL SHAPE STYLEU INTERMEDIATE RING
INSIDE DIAMETER3.875 INCHES NOMINAL IN
HEIGHT1.000 INCHES NOMINAL IN
MATERIALCOTTON INTERMEDIATE RING
MATERIALSTEEL SEPARATOR
MATERIALCOTTON BOTTOM RING
SUBSTITUTES & CROSS-REFERENCES 2
RENG1374-9Reference document
Same NSN cross-reference
Reference document — Secondary reference
RENG2070001Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusCancelled· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 207-000-1?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 207-000-1?
207-000-1 is a RESISTOR,FIXED,WIRE WOUND manufactured by APC.
What parts can replace 207-000-1?
There are 2 known substitutes for 207-000-1: RENG1374-9, RENG2070001. Substitute compatibility should be verified for your specific system.
What is the NSN for 207-000-1?
207-000-1 is cataloged in the U.S. Government catalog under NSN 5330-00-496-4104. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 207-000-1

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.