PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 206840
206840 ✓ Verified by PartsTable
— · NUT WASHER
WHAT YOU NEED TO KNOW
Match nut grade to bolt grade for full strength Lock nuts prevent loosening under vibration
Don't mix grades — weakens the joint
PRODUCT OVERVIEW

The TIE ROD END,STEERING is a the manufacturer industrial component. Key specifications include design_type: BALL STUD, special_features: ADJUSTABLE, end_item_identification: 3810-01-165-0647CRANE,WHEEL MOUNTED, rod_connecting_end_thread_location: EXTERNAL, rod_connecting_end_thread_direction: RIGHT-HAND. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5315-00-328-3723, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
206840
NSN: 5315-00-328-3723
FSC: 5315
CAGE: 5RQL2 — DRS ENVIRONMENTAL SYSTEMS INC (USA)
SPECIFICATIONS
design_typeBALL STUD
special_featuresADJUSTABLE
end_item_identification3810-01-165-0647CRANE,WHEEL MOUNTED
rod_connecting_end_thread_locationEXTERNAL
rod_connecting_end_thread_directionRIGHT-HAND
NSN5315-00-328-3723
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 206840 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
UNDERCUT WIDTH: 0.167 INCHES MINIMUM AND 0.177 INCHES MAXIMUM IN
•
EFFECTIVE LENGTH: 0.151 INCHES MINIMUM AND 0.161 INCHES MAXIMUM IN
•
UNDERCUT DIAMETER: 0.059 INCHES MINIMUM AND 0.065 INCHES MAXIMUM IN
•
SURFACE FINISH: 125.0 MICROINCHES ALL OTHER SURFACES
•
MATERIAL: STEEL COMP 1095 OVERALL
•
UNDERCUT RADIUS: 0.015 INCHES MINIMUM AND 0.030 INCHES MAXIMUM IN
•
HARDNESS RATING: 40.0 ROCKWELL C MINIMUM AND 43.0 ROCKWELL C MAXIMUM OVERALL
TECHNICAL CHARACTERISTICS (FLIS)
UNDERCUT WIDTH0.167 INCHES MINIMUM AND 0.177 INCHES MAXIMUM IN
EFFECTIVE LENGTH0.151 INCHES MINIMUM AND 0.161 INCHES MAXIMUM IN
UNDERCUT DIAMETER0.059 INCHES MINIMUM AND 0.065 INCHES MAXIMUM IN
OVERALL LENGTH0.475 INCHES MINIMUM AND 0.485 INCHES MAXIMUM IN
SURFACE FINISH125.0 MICROINCHES ALL OTHER SURFACES
MATERIALSTEEL COMP 1095 OVERALL
UNDERCUT RADIUS0.015 INCHES MINIMUM AND 0.030 INCHES MAXIMUM IN
HARDNESS RATING40.0 ROCKWELL C MINIMUM AND 43.0 ROCKWELL C MAXIMUM OVERALL
MATERIAL DOCUMENT AND CLASSIFICATIONSAE ASSN STD SINGLE MATERIAL RESPONSE OVERALL
DIAMETER0.1020 INCHES MINIMUM AND 0.1025 INCHES MAXIMUM IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 10
350-RTInterchangeable
interchangeable cross-reference
interchangeable
2012-T 6Interchangeable
interchangeable cross-reference
interchangeable
GGG-D-751Interchangeable
interchangeable cross-reference
interchangeable
13-306Interchangeable
interchangeable cross-reference
interchangeable
17105Interchangeable
interchangeable cross-reference
interchangeable
268Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 206840?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 206840?
206840 is a TIE ROD END,STEERING.
What parts can replace 206840?
There are 10 known substitutes for 206840: 350-RT, 2012-T 6, GGG-D-751 and 7 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 206840?
206840 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5315-00-328-3723. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 206840

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026