PartsTable
Technical Data Sheet
Download PDF

206595 NON-ASBESTOS — GASKET

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

206595 NON-ASBESTOS: GASKET.

The GASKET is a the manufacturer industrial component. Key specifications include hole_diameter: 0.276 INCHES MINIMUM AND 0.286 INCHES MAXIMUM LOCATION NOT OTHERWISE SPECIFIED IN, overall_width: 2.500 INCHES MINIMUM AND 2.624 INCHES MAXIMUM IN, special_features: 0.090 IN. FROM CENTER OF APERTURE TO CENTER OF BOLT CIRCLE; CONTAINS NON-ASBESTOS MATERIAL IN, aperture_diameter: 1.600 INCHES MINIMUM AND 1.640 INCHES MAXIMUM IN, bolt_circle_diameter: 2.000 INCHES NOMINAL IN, outside_corner_radius: 0.250 INCHES MINIMUM AND 0.312 INCHES MAXIMUM IN.

This part is cataloged in the U.S. Government catalog under NSN 5330-01-445-9959, indicating validated use in U.S. government and defense logistics supply chains.

Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
206595 NON-ASBESTOS
NSN: 5330-01-445-9959
FSC: 5330 — Packing and Gasket Materials
CAGE: 77445 — RTX CORPORATION DBA PRATT & WHITNEY DIV PRATT &WHITNEY (USA)
SPECIFICATIONS
hole_diameter0.276 INCHES MINIMUM AND 0.286 INCHES MAXIMUM LOCATION NOT OTHERWISE SPECIFIED IN
overall_width2.500 INCHES MINIMUM AND 2.624 INCHES MAXIMUM IN
special_features0.090 IN. FROM CENTER OF APERTURE TO CENTER OF BOLT CIRCLE; CONTAINS NON-ASBESTOS MATERIAL IN
aperture_diameter1.600 INCHES MINIMUM AND 1.640 INCHES MAXIMUM IN
bolt_circle_diameter2.000 INCHES NOMINAL IN
outside_corner_radius0.250 INCHES MINIMUM AND 0.312 INCHES MAXIMUM IN
cross-sectional_thickness0.014 INCHES MINIMUM AND 0.021 INCHES MAXIMUM IN
environmental_attribute_codeASBESTOS ALTERNATIVE PRODUCTS
side_radius_from_gasket_center0.960 INCHES MINIMUM AND 0.980 INCHES MAXIMUM IN
NSN5330-01-445-9959
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 206595 NON-ASBESTOS MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL THICKNESS: 0.014 INCHES MINIMUM AND 0.021 INCHES MAXIMUM IN
•
SIDE RADIUS FROM GASKET CENTER: 0.960 INCHES MINIMUM AND 0.980 INCHES MAXIMUM IN
•
APERTURE DIAMETER: 1.600 INCHES MINIMUM AND 1.640 INCHES MAXIMUM IN
•
BOLT CIRCLE DIAMETER: 2.000 INCHES NOMINAL IN
•
ENVIRONMENTAL ATTRIBUTE CODE: ASBESTOS ALTERNATIVE PRODUCTS
•
OUTSIDE CORNER RADIUS: 0.250 INCHES MINIMUM AND 0.312 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS
CROSS-SECTIONAL THICKNESS0.014 INCHES MINIMUM AND 0.021 INCHES MAXIMUM IN
SIDE RADIUS FROM GASKET CENTER0.960 INCHES MINIMUM AND 0.980 INCHES MAXIMUM IN
OVERALL WIDTH2.500 INCHES MINIMUM AND 2.624 INCHES MAXIMUM IN
APERTURE DIAMETER1.600 INCHES MINIMUM AND 1.640 INCHES MAXIMUM IN
BOLT CIRCLE DIAMETER2.000 INCHES NOMINAL IN
SPECIAL FEATURES0.090 IN. FROM CENTER OF APERTURE TO CENTER OF BOLT CIRCLE; CONTAINS NON-ASBESTOS MATERIAL IN
ENVIRONMENTAL ATTRIBUTE CODEASBESTOS ALTERNATIVE PRODUCTS
OUTSIDE CORNER RADIUS0.250 INCHES MINIMUM AND 0.312 INCHES MAXIMUM IN
HOLE DIAMETER0.276 INCHES MINIMUM AND 0.286 INCHES MAXIMUM LOCATION NOT OTHERWISE SPECIFIED IN
OTHER ITEMS IN FSC 5330 — Packing and Gasket Materials
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5330-00-000-0085 5330-00-000-0167 5330-00-000-5275 5330-00-001-1260 5330-00-001-1833 5330-00-001-1844 5330-00-001-1845 5330-00-001-1846
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy 206595 NON-ASBESTOS?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 206595 NON-ASBESTOS?
206595 NON-ASBESTOS is a GASKET.
What is the NSN for 206595 NON-ASBESTOS?
206595 NON-ASBESTOS is cataloged in the U.S. Government catalog under NSN 5330-01-445-9959. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 206595 NON-ASBESTOS

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.