PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 206567
206567 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The SEAL,PLAIN ENCASED is a the manufacturer industrial component. Key specifications include material: STEEL CASE, case_style: SQUARE, seal_width: 0.250 INCHES NOMINAL IN, outside_diameter: 1.566 INCHES NOMINAL IN, housing_bore_diameter: 1.561 INCHES NOMINAL IN, sealing_element_style: ANGULAR. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-592-3575, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
206567
NSN: 5330-00-592-3575
FSC: 5330
CAGE: 63734 — KAITLIN CORP (USA)
SPECIFICATIONS
materialSTEEL CASE
case_styleSQUARE
seal_width0.250 INCHES NOMINAL IN
outside_diameter1.566 INCHES NOMINAL IN
housing_bore_diameter1.561 INCHES NOMINAL IN
sealing_element_styleANGULAR
accommodated_shaft_diameter0.875 INCHES NOMINAL IN
accommodated_shaft_maximum_rated_speed2000 FEET PER MINUTE FT
NSN5330-00-592-3575
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 206567 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SEALING ELEMENT STYLE: ANGULAR
•
ACCOMMODATED SHAFT DIAMETER: 0.875 INCHES NOMINAL IN
•
MATERIAL: LEATHER SEALING ELEMENT
•
ACCOMMODATED SHAFT MAXIMUM RATED SPEED: 2000 FEET PER MINUTE FT
•
OUTSIDE DIAMETER: 1.566 INCHES NOMINAL IN
•
HOUSING BORE DIAMETER: 1.561 INCHES NOMINAL IN
•
CASE STYLE: SQUARE
TECHNICAL CHARACTERISTICS (FLIS)
SEALING ELEMENT STYLEANGULAR
ACCOMMODATED SHAFT DIAMETER0.875 INCHES NOMINAL IN
MATERIALLEATHER SEALING ELEMENT
ACCOMMODATED SHAFT MAXIMUM RATED SPEED2000 FEET PER MINUTE FT
OUTSIDE DIAMETER1.566 INCHES NOMINAL IN
MATERIALSTEEL CASE
HOUSING BORE DIAMETER1.561 INCHES NOMINAL IN
CASE STYLESQUARE
SEAL WIDTH0.250 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 22
3208XIAInterchangeable
interchangeable cross-reference
interchangeable
903208Interchangeable
interchangeable cross-reference
interchangeable
30D86Interchangeable
interchangeable cross-reference
interchangeable
SK5060NPC8761Interchangeable
interchangeable cross-reference
interchangeable
J3152505PC97Interchangeable
interchangeable cross-reference
interchangeable
157R1ST2Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 206567?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 206567?
206567 is a SEAL,PLAIN ENCASED.
What parts can replace 206567?
There are 22 known substitutes for 206567: 3208XIA, 903208, 30D86 and 19 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 206567?
206567 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-592-3575. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 206567

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026