PartsTable
Technical Data Sheet
Download PDF

206271 — GASKET

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

206271: GASKET.

The GASKET is a the manufacturer industrial component. Key specifications include material: CELLULOSE AND RUBBER NATURAL OVERALL, hole_diameter: 0.271 INCHES MINIMUM AND 0.291 INCHES MAXIMUM LOCATION NOT OTHERWISE SPECIFIED IN, overall_width: 2.740 INCHES MINIMUM AND 2.760 INCHES MAXIMUM IN, overall_length: 2.865 INCHES MINIMUM AND 2.885 INCHES MAXIMUM IN, outside_corner_radius: 0.365 INCHES MINIMUM AND 0.385 INCHES MAXIMUM IN, cross-sectional_thickness: 0.006 INCHES MINIMUM AND 0.026 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5330-00-366-3207, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
206271
NSN: 5330-00-366-3207
FSC: 5330 — Packing and Gasket Materials
CAGE: 66503 — WOODWARD, INC. DIV FUEL SYSTEMS AND CONTROLS (USA)
SPECIFICATIONS
materialCELLULOSE AND RUBBER NATURAL OVERALL
hole_diameter0.271 INCHES MINIMUM AND 0.291 INCHES MAXIMUM LOCATION NOT OTHERWISE SPECIFIED IN
overall_width2.740 INCHES MINIMUM AND 2.760 INCHES MAXIMUM IN
overall_length2.865 INCHES MINIMUM AND 2.885 INCHES MAXIMUM IN
outside_corner_radius0.365 INCHES MINIMUM AND 0.385 INCHES MAXIMUM IN
cross-sectional_thickness0.006 INCHES MINIMUM AND 0.026 INCHES MAXIMUM IN
center_to_center_distance_between_bolt_holes_along_width1.990 INCHES MINIMUM AND 2.010 INCHES MAXIMUM LOCATION NOT OTHERWISE SPECIFIED IN
center_to_center_distance_between_bolt_holes_along_length2.490 INCHES MINIMUM AND 2.510 INCHES MAXIMUM LOCATION NOT OTHERWISE SPECIFIED IN
NSN5330-00-366-3207
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 206271 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL THICKNESS: 0.006 INCHES MINIMUM AND 0.026 INCHES MAXIMUM IN
•
CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH: 2.490 INCHES MINIMUM AND 2.510 INCHES MAXIMUM LOCATION NOT OTHERWISE SPECIFIED IN
•
CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG WIDTH: 1.990 INCHES MINIMUM AND 2.010 INCHES MAXIMUM LOCATION NOT OTHERWISE SPECIFIED IN
•
OUTSIDE CORNER RADIUS: 0.365 INCHES MINIMUM AND 0.385 INCHES MAXIMUM IN
•
MATERIAL: CELLULOSE AND RUBBER NATURAL OVERALL
•
HOLE DIAMETER: 0.271 INCHES MINIMUM AND 0.291 INCHES MAXIMUM LOCATION NOT OTHERWISE SPECIFIED IN
TECHNICAL CHARACTERISTICS
CROSS-SECTIONAL THICKNESS0.006 INCHES MINIMUM AND 0.026 INCHES MAXIMUM IN
OVERALL LENGTH2.865 INCHES MINIMUM AND 2.885 INCHES MAXIMUM IN
OVERALL WIDTH2.740 INCHES MINIMUM AND 2.760 INCHES MAXIMUM IN
CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH2.490 INCHES MINIMUM AND 2.510 INCHES MAXIMUM LOCATION NOT OTHERWISE SPECIFIED IN
CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG WIDTH1.990 INCHES MINIMUM AND 2.010 INCHES MAXIMUM LOCATION NOT OTHERWISE SPECIFIED IN
OUTSIDE CORNER RADIUS0.365 INCHES MINIMUM AND 0.385 INCHES MAXIMUM IN
MATERIALCELLULOSE AND RUBBER NATURAL OVERALL
HOLE DIAMETER0.271 INCHES MINIMUM AND 0.291 INCHES MAXIMUM LOCATION NOT OTHERWISE SPECIFIED IN
OTHER ITEMS IN FSC 5330 — Packing and Gasket Materials
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5330-00-000-0085 5330-00-000-0167 5330-00-000-5275 5330-00-001-1260 5330-00-001-1833 5330-00-001-1844 5330-00-001-1845 5330-00-001-1846
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy 206271?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 206271?
206271 is a GASKET.
What is the NSN for 206271?
206271 is cataloged in the U.S. Government catalog under NSN 5330-00-366-3207. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 206271

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.