PartsTable
Technical Data Sheet
Download PDF

206052-315 — CLAMP,SYNCHRO

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

206052-315: CLAMP,SYNCHRO.

The CLAMP,SYNCHRO is a the manufacturer industrial component. Key specifications include width: 0.260 INCHES MINIMUM AND 0.265 INCHES MAXIMUM IN, height: 0.6122 INCHES NOMINAL IN, length: 0.209 INCHES NOMINAL IN, material: STEEL CORROSION RESISTING, thread_class: 2B, nominal_thread_size: 0.086 INCHES IN. This part is cataloged in the U.S.

Government catalog under NSN 5340-00-420-6032, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
206052-315
NSN: 5340-00-420-6032
FSC: 5340 — Hardware, Commercial
CAGE: 06773 — TIMBER TOP INC (USA)
SPECIFICATIONS
width0.260 INCHES MINIMUM AND 0.265 INCHES MAXIMUM IN
height0.6122 INCHES NOMINAL IN
length0.209 INCHES NOMINAL IN
materialSTEEL CORROSION RESISTING
thread_class2B
nominal_thread_size0.086 INCHES IN
thread_series_designatorUNIFIED NATIONAL COARSE (UNC)
NSN5340-00-420-6032
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 206052-315 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
LENGTH: 0.209 INCHES NOMINAL IN
•
NOMINAL THREAD SIZE: 0.086 INCHES IN
•
HEIGHT: 0.6122 INCHES NOMINAL IN
•
WIDTH: 0.260 INCHES MINIMUM AND 0.265 INCHES MAXIMUM IN
•
THREAD CLASS: 2B
•
MATERIAL: STEEL CORROSION RESISTING
•
THREAD SERIES DESIGNATOR: UNIFIED NATIONAL COARSE (UNC)
TECHNICAL CHARACTERISTICS
LENGTH0.209 INCHES NOMINAL IN
NOMINAL THREAD SIZE0.086 INCHES IN
HEIGHT0.6122 INCHES NOMINAL IN
WIDTH0.260 INCHES MINIMUM AND 0.265 INCHES MAXIMUM IN
THREAD CLASS2B
MATERIALSTEEL CORROSION RESISTING
THREAD SERIES DESIGNATORUNIFIED NATIONAL COARSE (UNC)
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Terminal item — no further procurement; issued until stock is exhaustedNo demilitarization required
Ready to buy 206052-315?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 206052-315?
206052-315 is a CLAMP,SYNCHRO.
What is the NSN for 206052-315?
206052-315 is cataloged in the U.S. Government catalog under NSN 5340-00-420-6032. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 206052-315