PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 206-062-834-1
206-062-834-1 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The CLAMP,LOOP is a the manufacturer industrial component. Key specifications include diameter: 0.208 INCHES MINIMUM AND 0.214 INCHES MAXIMUM IN, material: ALUMINUM ALLOY 2024 BAND, loop_width: 1.400 INCHES NOMINAL IN, loop_length: 3.050 INCHES NOMINAL IN, overall_width: 0.380 INCHES NOMINAL IN, style_designator: MULTIPLE LOOP CENTER MOUNT. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-165-7758, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
206-062-834-1
NSN: 5340-00-165-7758
FSC: 5340
CAGE: 97499 — BELL TEXTRON INC (USA)
SPECIFICATIONS
diameter0.208 INCHES MINIMUM AND 0.214 INCHES MAXIMUM IN
materialALUMINUM ALLOY 2024 BAND
loop_width1.400 INCHES NOMINAL IN
loop_length3.050 INCHES NOMINAL IN
overall_width0.380 INCHES NOMINAL IN
style_designatorMULTIPLE LOOP CENTER MOUNT
tongue_hole_typeROUND, UNTHREADED
material_thickness0.050 INCHES NOMINAL IN
material_document_and_classificationQQ-A-250/5,T42 FED SPEC SINGLE MATERIAL RESPONSE BAND
distance_from_loop_center_to_tongue_end2.045 INCHES NOMINAL IN
center_to_center_distance_between_loop_and_mounting_hole1.855 INCHES NOMINAL IN
NSN5340-00-165-7758
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 206-062-834-1 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE: 1.855 INCHES NOMINAL IN
•
STYLE DESIGNATOR: MULTIPLE LOOP CENTER MOUNT
•
LOOP WIDTH: 1.400 INCHES NOMINAL IN
•
LOOP LENGTH: 3.050 INCHES NOMINAL IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-A-250/5,T42 FED SPEC SINGLE MATERIAL RESPONSE BAND
•
MATERIAL: ALUMINUM ALLOY 2024 BAND
TECHNICAL CHARACTERISTICS (FLIS)
CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE1.855 INCHES NOMINAL IN
STYLE DESIGNATORMULTIPLE LOOP CENTER MOUNT
LOOP WIDTH1.400 INCHES NOMINAL IN
LOOP LENGTH3.050 INCHES NOMINAL IN
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-A-250/5,T42 FED SPEC SINGLE MATERIAL RESPONSE BAND
LOOP WIDTH1.400 INCHES NOMINAL IN
MATERIALALUMINUM ALLOY 2024 BAND
LOOP LENGTH3.050 INCHES NOMINAL IN
MATERIALALUMINUM ALLOY 2024 BAND
MATERIAL THICKNESS0.050 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 6
301221Interchangeable
interchangeable cross-reference
interchangeable
300C 21Interchangeable
interchangeable cross-reference
interchangeable
C04200Interchangeable
interchangeable cross-reference
interchangeable
9905006902116Interchangeable
interchangeable cross-reference
interchangeable
8756610Interchangeable
interchangeable cross-reference
interchangeable
30122Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 206-062-834-1?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 206-062-834-1?
206-062-834-1 is a CLAMP,LOOP.
What parts can replace 206-062-834-1?
There are 6 known substitutes for 206-062-834-1: 301221, 300C 21, C04200 and 3 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 206-062-834-1?
206-062-834-1 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-165-7758. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 206-062-834-1

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026