PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 2057079
2057079 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The HOOK,SCREW is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, wire_diameter: 0.151 INCHES NOMINAL IN, overall_length: 2.500 INCHES NOMINAL IN, style_designator: ROUND OFFSET BEND, surface_treatment: CADMIUM OVERALL, nonmachine_thread_style: WOOD SCREW (TYPE WD). This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-205-7079, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
2057079
NSN: 5340-00-205-7079
FSC: 5340
CAGE: 98320 — GREENFIELD MANUFACTURING CO., INC. (USA)
SPECIFICATIONS
materialSTEEL OVERALL
wire_diameter0.151 INCHES NOMINAL IN
overall_length2.500 INCHES NOMINAL IN
style_designatorROUND OFFSET BEND
surface_treatmentCADMIUM OVERALL
nonmachine_thread_styleWOOD SCREW (TYPE WD)
nonmachine_nominal_thread_diameter0.151 INCHES IN
NSN5340-00-205-7079
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 2057079 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SURFACE TREATMENT: CADMIUM OVERALL
•
MATERIAL: STEEL OVERALL
•
STYLE DESIGNATOR: ROUND OFFSET BEND
•
NONMACHINE THREAD STYLE: WOOD SCREW (TYPE WD)
•
WIRE DIAMETER: 0.151 INCHES NOMINAL IN
•
NONMACHINE NOMINAL THREAD DIAMETER: 0.151 INCHES IN
TECHNICAL CHARACTERISTICS (FLIS)
SURFACE TREATMENTCADMIUM OVERALL
OVERALL LENGTH2.500 INCHES NOMINAL IN
MATERIALSTEEL OVERALL
STYLE DESIGNATORROUND OFFSET BEND
NONMACHINE THREAD STYLEWOOD SCREW (TYPE WD)
WIRE DIAMETER0.151 INCHES NOMINAL IN
NONMACHINE NOMINAL THREAD DIAMETER0.151 INCHES IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 15
S2N010AWG105STRANDSTRANDSN030Interchangeable
interchangeable cross-reference
interchangeable
SInterchangeable
interchangeable cross-reference
interchangeable
S2-10Interchangeable
interchangeable cross-reference
interchangeable
10185956Interchangeable
interchangeable cross-reference
interchangeable
A702AInterchangeable
interchangeable cross-reference
interchangeable
CA3031-702AInterchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 2057079?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 2057079?
2057079 is a HOOK,SCREW.
What parts can replace 2057079?
There are 15 known substitutes for 2057079: S2N010AWG105STRANDSTRANDSN030, S, S2-10 and 12 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 2057079?
2057079 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-205-7079. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 2057079

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026