PartsTable
Technical Data Sheet
Download PDF

205151M — BOLT,MACHINE

✓ Government record, cited
— · BOLT SCREW
PRODUCT OVERVIEW

205151M: BOLT,MACHINE.

The BOLT,MACHINE is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, head_style: ROUND, head_height: 0.516 INCHES NOMINAL IN, thread_class: 2A A, head_diameter: 1.044 INCHES NOMINAL IN, thread_length: 1.500 INCHES MINIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5306-01-647-0031, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
205151M
NSN: 5306-01-647-0031
FSC: 5306 — Bolts
CAGE: 0DUK0 — EARNEST MACHINE PRODUCTS CO (USA)
SPECIFICATIONS
materialSTEEL OVERALL
head_styleROUND
head_height0.516 INCHES NOMINAL IN
thread_class2A A
head_diameter1.044 INCHES NOMINAL IN
thread_length1.500 INCHES MINIMUM IN
fastener_length2.500 INCHES NOMINAL IN
special_featuresOEM EARNEST MACHINE PRODUCTS;12502 PLAZA DR;CLEVELAND, OH; PHONE: 563-386-3382
thread_directionRIGHT-HAND
countersink_angle82.0 DEGREES NOMINAL
surface_treatmentZINC OVERALL
end_item_identification5419-01-543-0158
NSN5306-01-647-0031
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: 205151M · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
HEAD HEIGHT: 0.516 INCHES NOMINAL IN
•
FASTENER LENGTH: 2.500 INCHES NOMINAL IN
•
THREAD LENGTH: 1.500 INCHES MINIMUM IN
•
NOMINAL THREAD DIAMETER: 0.625 INCHES IN
•
HEAD STYLE: ROUND
•
THREAD DIRECTION: RIGHT-HAND
•
SURFACE TREATMENT: ZINC OVERALL
TECHNICAL CHARACTERISTICS
HEAD HEIGHT0.516 INCHES NOMINAL IN
FASTENER LENGTH2.500 INCHES NOMINAL IN
THREAD LENGTH1.500 INCHES MINIMUM IN
NOMINAL THREAD DIAMETER0.625 INCHES IN
HEAD STYLEROUND
THREAD DIRECTIONRIGHT-HAND
SPECIAL FEATURESOEM EARNEST MACHINE PRODUCTS;12502 PLAZA DR;CLEVELAND, OH; PHONE: 563-386-3382
SURFACE TREATMENTZINC OVERALL
COUNTERSINK ANGLE82.0 DEGREES NOMINAL
PART NAME ASSIGNED BY CONTROLLING AGENCYPLOW BOLT SQUARE NECK WITH DOME HEAD
OTHER ITEMS IN FSC 5306 — Bolts
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5306-00-001-1276 5306-00-001-1949 5306-00-001-1988 5306-00-001-1989 5306-00-001-1990 5306-00-001-1991 5306-00-001-1993 5306-00-001-2017
SUBSTITUTES & CROSS-REFERENCES 1
90934A804Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 205151M?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 205151M?
205151M is a BOLT,MACHINE.
What parts can replace 205151M?
There is 1 known substitute for 205151M: 90934A804. Substitute compatibility should be verified for your specific system.
What is the NSN for 205151M?
205151M is cataloged in the U.S. Government catalog under NSN 5306-01-647-0031. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 205151M