PartsTable
Technical Data Sheet
Download PDF

2050631 — GASKET

✓ Government record, cited
— · BOLT SCREW
PRODUCT OVERVIEW

2050631: GASKET.

The GASKET is a the manufacturer industrial component. Key specifications include head_style: FILLISTER, head_height: 0.072 INCHES MINIMUM AND 0.079 INCHES MAXIMUM IN, thread_class: 2A A, head_diameter: 0.166 INCHES MINIMUM AND 0.183 INCHES MAXIMUM IN, thread_length: 0.200 INCHES MINIMUM AND 0.250 INCHES MAXIMUM IN, screw_material: STEEL OR STEEL COMP 1010. This part is cataloged in the U.S.

Government catalog under NSN 5305-00-680-4808, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
2050631
NSN: 5305-00-680-4808
NIINs: 006804808, 015998850
FSC: 5305 — Screws
CAGE: 83298 — ALLIED SIGNAL INC AEROSPACE EQUIPMENT SYSTEMS EATONTOWN SITE (USA)
SPECIFICATIONS
head_styleFILLISTER
head_height0.072 INCHES MINIMUM AND 0.079 INCHES MAXIMUM IN
thread_class2A A
head_diameter0.166 INCHES MINIMUM AND 0.183 INCHES MAXIMUM IN
thread_length0.200 INCHES MINIMUM AND 0.250 INCHES MAXIMUM IN
screw_materialSTEEL OR STEEL COMP 1010
fastener_length0.219 INCHES MINIMUM AND 0.250 INCHES MAXIMUM IN
thread_directionRIGHT-HAND
internal_drive_styleCROSS RECESS TYPE 1
nominal_thread_diameter0.112 INCHES IN
screw_surface_treatmentCADMIUM
minimum_tensile_strength60000 POUNDS PER SQUARE INCH LBS
NSN5305-00-680-4808
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: 2050631 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
HEAD HEIGHT: 0.072 INCHES MINIMUM AND 0.079 INCHES MAXIMUM IN
•
SCREW SURFACE TREATMENT: CADMIUM
•
FASTENER LENGTH: 0.219 INCHES MINIMUM AND 0.250 INCHES MAXIMUM IN
•
SCREW MATERIAL DOCUMENT AND CLASSIFICATION: QQ-S-630 FED SPEC 2ND MATERIAL RESPONSE OR QQ-S-631 FED SPEC 2ND MATERIAL RESPONSE OR QQ-S-634 FED SPEC 2ND MATERIAL RESPONSE
•
THREAD LENGTH: 0.200 INCHES MINIMUM AND 0.250 INCHES MAXIMUM IN
•
NOMINAL THREAD DIAMETER: 0.112 INCHES IN
•
HEAD STYLE: FILLISTER
•
THREAD DIRECTION: RIGHT-HAND
TECHNICAL CHARACTERISTICS
HEAD HEIGHT0.072 INCHES MINIMUM AND 0.079 INCHES MAXIMUM IN
SCREW SURFACE TREATMENTCADMIUM
FASTENER LENGTH0.219 INCHES MINIMUM AND 0.250 INCHES MAXIMUM IN
SCREW MATERIAL DOCUMENT AND CLASSIFICATIONQQ-S-630 FED SPEC 2ND MATERIAL RESPONSE OR QQ-S-631 FED SPEC 2ND MATERIAL RESPONSE OR QQ-S-634 FED SPEC 2ND MATERIAL RESPONSE
THREAD LENGTH0.200 INCHES MINIMUM AND 0.250 INCHES MAXIMUM IN
NOMINAL THREAD DIAMETER0.112 INCHES IN
HEAD STYLEFILLISTER
THREAD DIRECTIONRIGHT-HAND
SCREW MATERIALSTEEL OR STEEL COMP 1010
MINIMUM TENSILE STRENGTH60000 POUNDS PER SQUARE INCH LBS
SUBSTITUTES & CROSS-REFERENCES 7
AN500-4-4Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
2481296Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
TF13451Reference document
Same NSN cross-reference
Reference document — Secondary reference
H72722-0406Reference document
Same NSN cross-reference
Reference document — Secondary reference
LL500-4-4MReference document
Same NSN cross-reference
Reference document — Secondary reference
42-250C2-89Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusCancelled· U.S. Government catalog
No demilitarization required
Ready to buy 2050631?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 2050631?
2050631 is a GASKET.
What parts can replace 2050631?
There are 7 known substitutes for 2050631: AN500-4-4, 2481296, TF13451 and 4 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 2050631?
2050631 is cataloged in the U.S. Government catalog under NSN 5305-00-680-4808. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 2050631

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.